Go to Post What is the airspeed velocity of an unladen wiffle ball? - The Doctor [more]
Home
Go Back   Chief Delphi > Old Forum Archives > 2001
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 24-06-2002, 00:25
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
 
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Programming the second joystick in PBASIC

Posted by Will Korinek at 2/7/2001 8:40 AM EST


Student on team #646, Mechanical Animals, from Sayville High School and Computer Associates.



Hi just wondering how to go about getting the second joystick to make a pwm go up or down, and the trigger and thumb buttons work as relays.

thanks,
Will Korinek
646 Mechanical Animals
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
  #2   Spotlight this post!  
Unread 24-06-2002, 00:25
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
 
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
You are already done!

Posted by Eric Reed at 2/7/2001 3:57 PM EST


Coach on team #481, NASA Ames / De Anza High School, from De Anza High School and It could be you!.


In Reply to: Programming the second joystick in PBASIC
Posted by Will Korinek on 2/7/2001 8:40 AM EST:



: Hi just wondering how to go about getting the second joystick to make a pwm go up or down, and the trigger and thumb buttons work as relays.

: thanks,
: Will Korinek
: 646 Mechanical Animals


It's already there. Joystick one controls PWM1, Joystick 2 PWM2, etc. through 4. Similarly, the buttons are already programmed to the relays. I think the trigger on joystick one sends relay one forward, and the thumbswitch sends relay one reverse...but that might be backwards.

Good Luck,

Eric
Team 481


__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
  #3   Spotlight this post!  
Unread 24-06-2002, 00:25
archiver archiver is offline
Forum Archival System
#0047 (ChiefDelphi)
 
Join Date: May 2001
Location: Pontiac, MI
Posts: 21,214
archiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond reputearchiver has a reputation beyond repute
Re: You are already done!

Posted by Gregory Ross at 2/7/2001 6:22 PM EST


Engineer on team #330, Beach Bots, from Hope Chapel Academy and NASA/JPL.


In Reply to: You are already done!
Posted by Eric Reed on 2/7/2001 3:57 PM EST:



: : Hi just wondering how to go about getting the second joystick to make a pwm go up or down, and the trigger and thumb buttons work as relays.

: : thanks,
: : Will Korinek
: : 646 Mechanical Animals

:
: It's already there. Joystick one controls PWM1, Joystick 2 PWM2, etc. through 4. Similarly, the buttons are already programmed to the relays. I think the trigger on joystick one sends relay one forward, and the thumbswitch sends relay one reverse...but that might be backwards.

: Good Luck,

: Eric
: Team 481

All this information can be found in the Control System Users Manual available on the Innovation First WWWeb site (Link below).

The default PWM controls are listed on page 27, and the relay controls are on page 28.


__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
single joystick programming Bill Bonsky OCCRA 2 04-10-2003 09:47
Programming with the PBASIC Tokenizer Raven_Writer Programming 12 05-01-2003 15:27
Programming PBASIC for pneumatics archiver 2001 2 23-06-2002 23:58
joystick problem archiver 2000 12 23-06-2002 23:08
pbasic programming punarhero Programming 4 21-01-2002 23:32


All times are GMT -5. The time now is 10:51.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi