|
|
|
 At every event I've seen this year, there has been at least one robot that left a part on the field. Even some of the robots have decided they don't want to play and this year and made a break for it in autonomous! :yikes: - ctt956 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Stuck in evaluation mode!
Stuck in evaluation mode, we have tried several ways to make our project go to edit mode but have well...failed. When we try to build the program the error pops up and says you are still in evaluation mode and need to be in edit mode so please help
 
|
|
#2
13-01-2012, 22:03
|
||||
|
||||
|
Re: Stuck in evaluation mode!
You didn't mention the steps that you tried.
LabVIEW must be activated to use some features, this can be done via the "NI License Manager" and find the current version of LabVIEW. If it is green, then it is already activated, if not, then click on activate, and follow the prompts. I suspect that you may have not entered your serial number during installation. (Or it was mistyped.)
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
