Programming Kinect

[NeatTeam]

We tried to use this code and it didn't work.
This doesn't show us values in LabView.

[SuperS_5]

The only thing I see in that file is a LV project file. There is no code.

[NeatTeam]

Sorry, this is the code:

[NeatTeam]

Can someone help us?
Look at my previous comment.

[SuperS_5]

Disclaimer: Sorry I do not have a Kinect at work to test this out. I will have to figure out how to get my hands on one before I can actually test this stuff out. My help may not be all that useful.

Do you see the Kinect working in the driver station? On the "Operation" Tab there is a status indicator. On the "Diagnostics" tab, there is a Kinect indicators, along with a refresh button. The Dashboard also has a tab for the Kinect Skeleton, does this work?

[NeatTeam]

actually, i always could see the skeleton at the driver station.
so its not the problem.
any more helpful tips?

[Omar]

Originally Posted by NeatTeam

actually, i always could see the skeleton at the driver station.

OK you can see the skeleton, but does it work? Does the skeleton move?

As SuperS 5 asked...
Do you see the Kinect working in the driver station?

On the "Operation" Tab there is a status indicator.
On the "Diagnostics" tab, there is a Kinect indicators, along with a refresh button.

The Dashboard also has a tab for the Kinect Skeleton, does this work?

[NeatTeam]

Thanks for your comment, yes, everything works great in the dashboard and the driver station, any other ideas?

[Greg McKaskle]

I haven't opened the rar, but it sounds like it doesn't contain the code anyway. Can you explain what doesn't work? What is it you are reading on the robot, where are you reading it, etc.

Greg McKaskle

[NeatTeam]

Originally Posted by Greg McKaskle

I haven't opened the rar, but it sounds like it doesn't contain the code anyway. Can you explain what doesn't work? What is it you are reading on the robot, where are you reading it, etc.

Greg McKaskle

we uploaded a new file ,look at the next posts.
the code doesnt work at all, i mean raising my hand and moving around wont affect the vaules, its not affecting the Y Axis and neither the X Axis.

what can we do?

[Mark McLeod]

I see what you mean.
Retrieving data from the Kinect isn't straight-forward for me either on a particular PC.
The network communication task does not appear to be supplying the Kinect data to the cRIO.

I'll see what I can discover.

P.S.
It seems to be due to the Driver Station PC, possibly when some of the required Kinect software is missing from it.
Symptoms are: the DS/Dashboard Kinect skeleton feedback works fine, but the cRIO never receives the data.
The good news is that your software works if I run it with a properly built Driver Station PC, such as the Classmate.
I'll experiment some more to see what you're likely to be missing, or what's messing things up.

P.P.S.
I assume it was not something really simple like failing to enabled from the Driver Station?