|
|
|
 On the one hand, I wouldn’t want to discourage innovation. But on the other, I would want to encourage simplicity. - Jack Jones [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| On the one hand, I wouldn’t want to discourage innovation. But on the other, I would want to encourage simplicity. - Jack Jones [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Issues with Camera Stream to SmartDashboard
I have set up the axis camera to enable anonymous viewing and I have directed the camera widget in the SmartDashboard to the correct IP address. The connection widget flashes green, indicating the SmartDashboard has contact with the robot. I am also able to put a string to the SmartDashboard. Despite this, the camera feed does not show up. Any tips?
|
|
#2
24-01-2012, 23:40
|
|||
|
|||
|
Re: Issues with Camera Stream to SmartDashboard
You have to wait a good 5-10 seconds to make sure it's not finding anything.
Also, make sure you can ping the camera (just to make sure you are connected), or instead of pinging, just visit the camera's ip address on a browser.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
