|
|
|
 (i would watch out for those jag's if i were you) - Scott Bahl [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| (i would watch out for those jag's if i were you) - Scott Bahl [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Material for hood
My team is designing a shooter with a hood, and we are wondering what sort of material we should use for the hood. Also, what sort of material should we use for a prototype?
|
|
#2
24-01-2012, 17:21
|
||||
|
||||
|
Re: Material for hood
A good material is lexan because it is lightweight and easy to prototype with. It also can be bent to make it a good material to tweak and prototype with.
-Thomas
|
|
#3
24-01-2012, 17:21
|
|||||
|
|||||
|
Re: Material for hood
We prototyped our shooter wide sides cut out of 1/2" plywood and a top of 1/16" lexan. add some 2x4s for framing and wood screws to hold it all together and you're set.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
