|
|
|
 Now, I either need to convince Mike Martus to start the webhug early (or move it back 1 hour), skip the webhug, miss the first part of the presentation, or just clone myself. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Team 3647 Presents: The Scalper
To continue with our naming our robots after death-related objects we have dubbed the 2012 robot The Scalper, due to it's tendency to remove the covers of balls [fixed now...] and the MoHawk appearance the shooter hood resembles.
This robot represents our 2nd year of FRC and breaks new ground for us in design, fabrication and software. It couldn’t have been done without the dedication of all our students, mentors and parents. We will be at the San Diego Regional March 2 though 4. Come check us out! So without further ado:      Drive: 27x37 inch 118.5 Lbs 6 Wheel AM C-Base 4 CIM with Toughbox Minis 10 FPS Single Speed 10 inch Penumatic SkyWayWheels with Custom Hubs Pickup: 8 PolyCord Belts 2 P60 16:1 RS-550s Welded 1x1 6061 Frame 3 Ball Capacity 8 inch Pneumatic Piston Stop Shooter: 9015 with AM Planetary 8 inch Plaction Wheel MoHawk Sheetmetal Hood 260 Degree Turret with P60 20:1 RS-550 Bridge: Parallel 4 Bar Linkage 6 inch Pneumatic Piston 4 inch idler wheel Last edited by Mk.32 : 24-02-2012 at 03:18. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
