|
|
|
 All the robots win, because we built them and they work. ;) - synth3tk [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| All the robots win, because we built them and they work. ;) - synth3tk [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
2012 FTC KOP
Has anyone figured out how to read in the 2012 FTC KOP? I get an error stating they were created in a newer version. We are using Creo Pro Engineer 5.0.
|
|
#2
01-10-2012, 20:56
|
||||
|
||||
|
Re: 2012 FTC KOP
how have you tried to load them? Did you make sure you downloaded the correct format? .step is always a safe CAD format.
|
|
#3
02-10-2012, 08:15
|
||||
|
||||
|
Re: 2012 FTC KOP
Oh-no, sounds like PTC may have updated all the CAD files to Creo 2.0. This is the latest version of CAD from PTC and supersedes Pro/ENGINEER Wildfire 5.0. I am doing some research now and will find out if this is the case. Hopefully there is a chance to provide the files in WF5.0 format, otherwise you'll need to upgrade to Creo 2.0.
The upgrade is not a big deal and the software can be requested here: http://bit.ly/QmMZuV
|
|
#4
02-10-2012, 10:27
|
||||
|
||||
|
Re: 2012 FTC KOP
Yes, all the models are in Creo 2.0 format. If anyone is using the KOP and Field models from http://bit.ly/SzvV3B, you will need to use Creo 2.0 to work with these models.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
