|
|
|
 Wait hold the phone. Do you mean its physically possible to not spend time on robotics during the season?!!! Too much.......for brain......to compute!...goes against.....beliefs........aaaaarrrrrrghhhhhh!!!
[syntax error] - BuddyB309 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
D-link solid red light
When we wired in the Dlink it shows a blue light then very quickly flashes to red and stays a solid red. We tried the same thing with our dlink from last season and it did the same thing. It is wired into the 12-v / 5-v convertor. The convertor is wired into the 12v pdb. It is not the polarities because we tried switching both ways. Our voltmeter also reads 5.0 volts for what is coming out of the convertor. Also, it seems other teams are having this problem. Anyone have any ideas?
|
|
#2
12-01-2013, 16:50
|
||||
|
||||
|
Re: D-link solid red light
Which status light is red?
Is the converter wired to the dedicated power supply? What mode is it set to (AP, bridge, router)? I've never heard of a team having an issue with a red light - is it red or amber? |
|
#3
12-01-2013, 17:00
|
|||
|
|||
|
Re: D-link solid red light
The power light for the D-Link will light up to a light blue for about one second, then the power light will turn red. We have the D-Link is set to "AP 2.4 GHz" mode. duffany1 was having the same problem we are, but that thread did not help us.
P.S. We thoroughly loved your avatar. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
