|
|
|
 Does that mean that the Ultimate Question of Life, the Universe, and Everything is, "How many total tubes will be available to score for the FRC 2011 game, LogoMotion? - EricH [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
LabVIEW Running Slow
Whenever I start LabVIEW it starts extremely slow and runs even slower. It wasn't like this before and I just had to reinstall it. Thanks for any help
|
|
#2
18-01-2013, 18:06
|
||||
|
||||
|
Re: LabVIEW Running Slow
Because a problem like this can be attributed to many different causes, I have a few questions that will hopefully narrow down possibilities:
1. How old is the computer and what is the model? 2. Do any other applications run slowly? 3. If it is a laptop, have you tried running LabVIEW while a charger is plugged in?
|
|
#3
19-01-2013, 12:01
|
|||
|
|||
|
Re: LabVIEW Running Slow
It is an Alienware M17x R4 and I got it brand new from dell in November I believe. LabVIEW is the only program that runs slow and I never use my laptop unplugged unless I have to
|
|
#4
19-01-2013, 12:39
|
|||
|
|||
|
Re: LabVIEW Running Slow
What portions are slow? What are you comparing it to?
Greg McKaskle
|
|
#5
19-01-2013, 12:42
|
|||
|
|||
|
Re: LabVIEW Running Slow
Everything from starting is slow. I haven't even made it to the project explorer since this issue started, it freezes was to fast
|
|
#6
19-01-2013, 12:47
|
|||
|
|||
|
Re: LabVIEW Running Slow
Does it freeze or run slow?
Can you open the task manager, launch LabVIEW, and report what you see with approximate times. It is possible that something was not installed correctly, it is also possible that a virus scanner is taxing LV to death because of the number of files we touch or where the files are located. The task manager should help shed some light. Greg McKaskle
|
|
#7
19-01-2013, 12:51
|
|||
|
|||
|
Re: LabVIEW Running Slow
What happens as I try to load a project it starts loading it loads 68 files then stops. Task manages says its running and CPU usage is at 1% sometimes 2%
|
|
#8
19-01-2013, 13:34
|
|||
|
|||
|
Re: LabVIEW Running Slow
Does the rest of the task manager show anything bumping up? Can you try with virus scanning turned off? If you let it go for a minute or two, does it improve?
I'm not aware of a common hanging point during load, but LV is a large and complex app, and for instance, it uses a database to cache compiled code on your hard drive. It could be that it is doing something that will be a one time hit. I'd love to be able to explain what it is, ideally demonstrate it to folks on the appropriate team and get them to correct it, but at this point I don't know enough about the issue. Greg McKaskle
|
|
#9
19-01-2013, 13:37
|
|||
|
|||
|
Re: LabVIEW Running Slow
What o you mean bumping up? It may have worked while I had virus off but when I closed AVG out it was loaded and its working for now
|
|
#10
19-01-2013, 13:53
|
|||
|
|||
|
Re: LabVIEW Running Slow
I used the term bumping up to refer to an increase the CPU usage of some other process.
Greg McKaskle
|
|
#11
19-01-2013, 14:04
|
|||
|
|||
|
Re: LabVIEW Running Slow
No, it just floats at 1-2% unless I do anything else
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
