MARS 2614's Practice Robot Nearing Completion!

[lscime]

Since 2011, MARS has built its practice "beta" robot slightly ahead of schedule of the construction of its competition "alpha" robot (allowing us to identify issues and fix them before construction the alpha robot). This year's beta robot is taking shape and is (almost) ready for a weekend of testing and improvement!

https://www.facebook.com/photo.php?f...type=3&theater

https://www.facebook.com/photo.php?f...type=3&theater

https://www.facebook.com/photo.php?f...type=3&theater

Some Details:
-Dropped center 6WD, 2-speed transmission geared for 5ft/s and 17ft/s.
-2 wheel linear shooter.
-360 degree rotating and tilting turret.
-Load disks from feeder station, YES.
-Floor pickup, YES.
-Fit under pyramid, YES.
-Level 1 hang, YES.
-Level 2 hang, HOPEFULLY (it's designed but we won't know for sure until we do some more testing ).

Good luck to everyone!!

[Akash Rastogi]

I'm digging the colsons. Looks like some of the northeast teams rubbed off on you.

Stoked to see video of this soon, looks to be another effective design from MARS.

[Anupam Goli]

Are those 8 inch Colson's? O.O

This is a very pretty bot, though I still don't see the frisbee pickup or shooter. I guess that's all in construction? Can't wait to see it run!

[lscime]

Are those 8 inch Colson's? O.O

This is a very pretty bot, though I still don't see the frisbee pickup or shooter. I guess that's all in construction? Can't wait to see it run!

The Colson's are 6 inch. This is the first year we're using them and we're excited to try them out at competition!

Correct, the shooter transmission and wheels are not yet mounted and neither is poly cord or the front part of the floor capture device which makes it kind of hard to see those subsystems in the picture. You can see them in the CAD though (you might have to squint to see the shooter wheels hiding behind the shooter rails in the CAD )

[Joe G.]

Looks great!

It's a bit hard to tell, but it doesn't look like there's enough space for four frisbees in the ground pickup. Is there some way that frisbees are fed back into the human load chute on top?

[escime]

Well, we have to leave something to mystery. We can pick up four frisbees

[Garten Haeska]

Originally Posted by escime

Well, we have to leave something to mystery. We can pick up four frisbees

The turret tips down and the frisbee is put into the same chute that it will fly out of?

[Andrew Zeller]

Originally Posted by Garten Haeska

The turret tips down and the frisbee is put into the same chute that it will fly out of?

I agree with this. It appears that the turret would turn 180 degrees from its position in the CAD render and then would tip to allow frisbees to directly enter the shooter barrel from the intake. I am still puzzled as to how it can hold 4 frisbees between the intake and the shooter.

The intake is interesting, because it appears that frisbees would slide onto that plate for a few inches before contacting the roller.

Can you provide any details regarding the wheel mounted between the shooter and the frisbee hopper? Could this be part of your level 2 hanging mechanism?

[lscime]

Originally Posted by Andrew Zeller

I agree with this. It appears that the turret would turn 180 degrees from its position in the CAD render and then would tip to allow frisbees to directly enter the shooter barrel from the intake. I am still puzzled as to how it can hold 4 frisbees between the intake and the shooter.

The intake is interesting, because it appears that frisbees would slide onto that plate for a few inches before contacting the roller.

Can you provide any details regarding the wheel mounted between the shooter and the frisbee hopper? Could this be part of your level 2 hanging mechanism?

You are correct about the shooter tipping down in order to receive ground disks from the capture device. The Frisbees then travel to the rear of the shooter where a mechanism (which you can't really see) loads them up into the the hopper. As you might imagine there are quite a few moving parts to the ground pick up system and in general we plan to load from the feeder station. The ground pickup capability is mostly for autonomous.

I believe you are seeing the wheels which help feed the Frisbees down from the hopper into the shooter (similar to the wheels on Robot in 3 Days).

[DampRobot]

I just love that time of year when I get to see what cool designs other people have been working on...

I was especially excited to see the intake. Besides the obvious (climbing), pickup of frisbees is the most chalenging part of the game. It looks like you've found a solution that works for you, we just never found a way to pick up frisbees that was satisfactory fo us.

Good luck with your season!

[ToddF]

Looks fantastic. I was especially taken with the idea of using the shooter elevation actuator as your level 1 tower lift.

[Orion.DeYoe]

Originally Posted by lscime

Since 2011, MARS has built its practice "beta" robot slightly ahead of schedule of the construction of its competition "alpha" robot (allowing us to identify issues and fix them before construction the alpha robot). This year's beta robot is taking shape and is (almost) ready for a weekend of testing and improvement!

https://www.facebook.com/photo.php?f...type=3&theater

https://www.facebook.com/photo.php?f...type=3&theater

https://www.facebook.com/photo.php?f...type=3&theater

Some Details:
-Dropped center 6WD, 2-speed transmission geared for 5ft/s and 17ft/s.
-2 wheel linear shooter.
-360 degree rotating and tilting turret.
-Load disks from feeder station, YES.
-Floor pickup, YES.
-Fit under pyramid, YES.
-Level 1 hang, YES.
-Level 2 hang, HOPEFULLY (it's designed but we won't know for sure until we do some more testing ).

Good luck to everyone!!

Great robot! Your floor pickup roller system seems to work similar to ours.
I can't wait to see you guys at Pittsburgh!

[lscime]

We have an open house tomorrow and we will have more pictures and video of our alpha (competition) bot then. But we figured we'd just leave these here for now

Testing shooting from the feeder station (we forgot to put in fresh battery so it starts to die toward the end).
http://www.youtube.com/watch?v=maMCX...ature=youtu.be

Level 1 hang
https://www.facebook.com/photo.php?f...type=3&theater

We decided to go all out on the LEDs this year
https://www.facebook.com/photo.php?f...type=3&theater

Keep your eyes open for more about Marvin VI And good luck to everyone in these last few days!!

[Akash Rastogi]

Blown away by how much your team has improved over the seasons.

I think this will be an excellent machine at competitions. Great work!

[Alex2614]

Originally Posted by Akash Rastogi

Blown away by how much your team has improved over the seasons.

I think this will be an excellent machine at competitions. Great work!

Thank you! I am too. It's great to see that it's not just us biased ones that hold that opinion

I still remember rookie year (2008), meeting for the first time on the day of kickoff. None of us had any idea how far we would come.