|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
2013 Western Canadian FRC Regional Pit Power
Received last night from the Western Canadian FRC Regional folks:
"However, we are extremely limited in power at the venue. Be sure to charge your cell phones and personal devices at home (you will not be permitted to do so at the competition). Ensure your laptops and batteries are fully charged prior to entering the Oval. Battery and game laptops will be permitted to juice up, anything outside of this will not be permitted. Tools with low power consumption will be allowed - use the machine shop for larger tools. Only 10 Watts per team is allocated - respect it or you will have to be the one resetting the breaker every 10 minutes." 10 watts??? Battery charging will take vastly more than that! Then there's pit lighting, corded power tools, etc. Doing some simple math on this means that the plan is to power all 30 teams at 10 watts each 30 x 10 = 300 watts total! |
|
#2
|
||||
|
||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Quote:
|
|
#3
|
||||
|
||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Maybe they meant 10 Amps (after all breakers are measured in Amps, not Watts)? Charging a battery 12V @6A pulls less than 1A of current at 120V. It's reasonable to charge a few batteries plus a laptop within 10A. Start tossing on additional laptops, cell phones, and power tools and it'll rapidly get up there, though!
Unfortunately, FIRST is stuck with whatever power system is available at the venue. If power turns out to be a huge issue, hopefully they'll look at alternative nearby venues for next year! |
|
#4
|
||||
|
||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
This might be a dumb question but isn't "available electrical power capacity" one of the items on some kind of standardized Venue Selection Requirements Checklist (along with things like floor space, seating capacity, parking, etc)???
I've experienced some issues like this at various off-season events but you shouldn't expect to see this at an official regional event (given the prices we pay). |
|
#5
|
||||||
|
||||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Quote:
|
|
#6
|
|||
|
|||
|
Re: 2013 Western Canadian FRC Regional Pit Power
A singular typical household North American AC outlet can push ~1500W. There's just no way that they actually meant 10W/team. A 2A trickle charge @ 12VDC is 24W.
I would estimate a typical FRC team's pit power needs as follows: Continuous: 6x 6A battery chargers @12VDC = 6x72W = 432W 2x Laptop power supplies (programming/driver station) @ 75W = 150W Intermittent: Corded Drill @ ~350W Benchtop Bandsaw @ ~300W Benchtop Drillpress @ ~400W Incandescent Worklight @ 60-100W Peak usage: 432 + 150 + 350 + 300 + 400 + 100 = 1732W, or just a bit more than a regular 15A circuit could provide, if they wanted to use everything at once. |
|
#7
|
|||||
|
|||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Quote:
|
|
#8
|
|||
|
|||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Quote:
|
|
#9
|
||||||
|
||||||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Quote:
![]() |
|
#10
|
|||
|
|||
|
Re: 2013 Western Canadian FRC Regional Pit Power
Thank you Karthik.
FIRST standard is 10 Amps of power per team. We know we have 10 amps available - we have a technician who is working with the venue to see if it is possible to increase that to 15 amps of power per team. Blair Regional Director |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|