World Rankings

[Joe Ross]

I used the First in Michigan point system to calculate rankings for each of the 75 regionals and combine them into a world ranking. See the attached spreadsheet.

Here's the scoring system, from the FiM Rules Supplement

POINT CATEGORY POINTS 					POINTS 		
Win-Loss Record in Qualifying Rounds 							
Win 							2
Tie 							1
Final Alliance Captains After Picking 							
#1 Alliance Captain 					16		
#2 Alliance Captain 					15		
#3 Alliance Captain down to #8 Alliance Captain 	14 down to 9 		
Draft Order by Acceptance 							
#1 Draft Pick (Accepted) 				16			
#2 Draft Pick (Accepted) 				15			
#3Draft Pick down to #16 Draft Pick 			14 down to 1 				
Elimination Round Performance 							
Winning Alliance Teams: 							
Alliance Captain and First Pick				30			
Second Pick						24	
Finalist Alliance Teams: 							
Alliance Captain and First Pick				20			
Second Pick						16	
Semi Finalist Alliance Teams: 							
Alliance Captain and First Pick				10			
Second Pick						8	
Awards 							
Industrial Design 					5		
Quality 						5	
Excellence in Engineering 				5			
Innovation in Control 					5		
Creativity 						5	
Entrepreneurship 					5		
Team Spirit 						2	
Gracious Professionalism 				2			
Imagery 						2	
Highest Rookie Seed 					2		
Industrial Safety 					2		
Judges Award 						2	
Rookie Inspiration 					2

Like FiM, I only counted a team's first two events. However, since a majority of teams only play one event, I did not want to overly punish a team for only playing one event, and multiplied their point values by 2 (which assumes they would have done just as well at a second event). Additionally, in Michigan, everyone plays 12 matches per event. However, at other regionals, teams play as few as 8 matches. Since teams earn points for Wins and Ties, I normalized every event wins and ties points based on the actual number of matches played, based on 12 matches and rounded.

I have also included the results prior to normalization for comparison.

Congratulations to team 1986 for having the highest score in both the normalized and unnormalized results. For teams that only attended a single regional, team 955 had the best normalized result and team 4265 had the best unnormalized result.

All tiebreakers were implemented, however, there was still 1 tie, team 1571 and 3527 had the same points, Elim Score, Best Elims Draft Score, Best Draft, QP, Wins, and 3 highest scores.

Let me know if you find any errors. The alliance selection data was taken from the 2013 Alliance Selection thread, and there may be errors or typos.

[stingray27]

How did you determine what teams where alliance captains and 1st picks, etc.?

[Ivan Malik]

Thread that has been going on all season

[nikeairmancurry]

Originally Posted by stingray27

How did you determine what teams where alliance captains and 1st picks, etc.?

The Alliance selection thread would be most helpful there...

[stingray27]

Yeah ok. Thanks. I had known about that thread and was wondering if there was actually any "official" data out there regarding alliance selection and how the draft had played out at each tournament. I have been wondering about it for a while to see if I would be able to parse it from somewhere for my app....

[Basel A]

Originally Posted by stingray27

Yeah ok. Thanks. I had known about that thread and was wondering if there was actually any "official" data out there regarding alliance selection and how the draft had played out at each tournament. I have been wondering about it for a while to see if I would be able to parse it from somewhere for my app....

Joe has been going through the Alliance Selections thread over the past week or two, correcting and adding results from various regionals. As for parsing, alliance member with the highest rank is automatically the captain, but telling the 1st pick from the 2nd pick can't be done using the online data provided by first. Well, except that any pick with a rank higher than the lowest captain had to have been the alliance's first pick.

[Joe Ross]

Originally Posted by stingray27

Yeah ok. Thanks. I had known about that thread and was wondering if there was actually any "official" data out there regarding alliance selection and how the draft had played out at each tournament. I have been wondering about it for a while to see if I would be able to parse it from somewhere for my app....

FIRST has the data, but doesn't publish it. Ed Law does a good job guessing the ambiguous cases using OPR in his scouting spreadsheet, but that's not that great when you get to the 6th, 7th, and 8th seeds with the serpentine. As others said, I used the alliance selection thread, and supplemented with other sources when needed.

[stingray27]

Ok. Well, thanks to all those who helped put this information online for those to use, and thanks Joe for compiling this information.

Is there anyway we can get FIRST to supply this information or put it somewhere online? I know it would be of great use for FIRST in Michigan, private applications and just to use in general. Possibly add it to the elimination schedule page on the FIRST information or FMS feed, or possibly organize the stations certain seeds are for their first matches, then randomize them after that. Anything would be nice....

[Joe Ross]

Originally Posted by stingray27

Is there anyway we can get FIRST to supply this information or put it somewhere online? I know it would be of great use for FIRST in Michigan,

FiM gets the data directly from the FTA. See http://www.chiefdelphi.com/forums/sh...82&postcount=3

[kjohnson]

Team 103 is ranked 103 with 103 points...

[Hallry]

Are week 7 events (specifically MAR and FiM Championships) included in this?

[Joe Ross]

Originally Posted by Hallry

Are week 7 events included in this?

The Chesapeake regional is included. The Michigan and MAR championships are not. Since each team at the championships were already involved in 2 events, it wouldn't have impacted the rankings.

[Bob Steele]

I am assuming that no points were given for Engineering Inspiration or Chairman's Awards? I don't see them on the charts...just the other awards like spirit and safety, etc
i guess this is an artifact of using the FiM system. They don't give ranking points for these awards because they qualify directly for the State Championship... Normally teams that win one of these bigger awards don't receive any of the other awards that ARE given points under the FiM rules..

[Navid Shafa]

Originally Posted by Bob Steele

i guess this is an artifact of using the FiM system.

Correct:

Originally Posted by Jim Zondag

Q18: “Why are there no ranking points associated with the Chairman’s Award, Engineering Inspiration Award, and Rookie All Star Award?”
A18: This decision for this was made by FIRST NH, not FiM. FIRST considers these 3 awards to be “Culture Changing Awards” and wishes them to remain apart from the rest of the competition awards.
FiM disagrees with this position, and we feel that the decision not to award points for these items actually degrades the prestige of these awards relative to the others by making them worth nothing in our system.

Taken from Jim Zondag's FAQ's:
http://www.chiefdelphi.com/media/papers/2804?

[Joe Ross]

Originally Posted by nukemknight

Team 103 is ranked 103 with 103 points...

That is the only occurrence of all three matching. Team 11 is ranked 11. No other team has the same number of points as their team number.