|
|
|
 You worry about your team. Let other people worry about their own teams. - pfreivald [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| You worry about your team. Let other people worry about their own teams. - pfreivald [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
[FTC]: Field Hardware USB hub
WE have a field that is permanently set up. We have FCS working fine, however, We would like to set up the Controllers using the USB Hubs just like in Competitions. Is there a parts list for setting up the field?
|
|
#2
06-11-2013, 18:32
|
||||
|
||||
|
Re: [FTC]: Field Hardware USB hub
Per alliance station, you'll need the following:
1 Powered USB hub (Needs to be powered, I recommend a 7 Port Hub) 4 Logitech controllers (F310, with the switch on the bottom set properly) 1 USB Extension cord (Preferably with a repeater) You ought to be able to find all the parts you need at OfficeMax, BestBuy or Radioshack. Good luck. And if you need any further tips, let me know.
|
|
#4
15-11-2013, 21:30
|
|||||
|
|||||
|
Re: [FTC]: Field Hardware USB hub
Here in Florida we have 5 Leagues that each has a "tournament in a box" which is all of the field electronics in a box ready to set up a tournament in a matter of minutes. This is the hub and cables we use for the setup.
http://www.amazon.com/7-Port-USB-2-0.../dp/B000KUQ8FG http://www.monoprice.com/Product?c_i...seq=1&format=2
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
