|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
1.25" or 1.7" ?
Posted by rebecca at 1/28/2001 12:14 PM EST
Student on team #192, gunn robotics team, from gunn high school. I could be mistaken, but I beleive the hang bar in last years game was made from a piece of 1 1/4" Schedule 40 aluminum pipe. However the outside diameter of the pipe was something close to 1.7." So I am wondering...these dimensions also apply to the two grab bars on the bottom of the goals? rebecca |
|
#2
|
|||
|
|||
|
Re: 1.25" or 1.7" ?
Posted by Denny McBride at 1/28/2001 3:46 PM EST
Other on team #379, Robocats, from Girard High School. In Reply to: 1.25" or 1.7" ? Posted by rebecca on 1/28/2001 12:14 PM EST: The gab bars are 1.625 minimum. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|