|
|
|
 How are we as mentors and coaches presenting ourselves? We we are is who they will emulate. It is the nature of coaching, the nature of leading. - MysterE [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| How are we as mentors and coaches presenting ourselves? We we are is who they will emulate. It is the nature of coaching, the nature of leading. - MysterE [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Mounting VersaPlanetary to CIM/MiniCIM
Let me first say that I have seen both this and this thread.
These are pretty good guides for how to do this. However this year many of the robots I have seen have been doing this (both JVN and Copioli from BB) and I wanted to get some lessons learned from the process. Most of the info I can find is from last season at the most recent. Most specifically has anyone figured out the best way to do this with minimal tools, ideally not having to cut the shaft or key? All tips and tricks appreciated! |
|
#2
28-01-2014, 01:04
|
|||||
|
|||||
|
Re: Mounting VersaPlanetary to CIM/MiniCIM
We're still using the same process, it is a little annoying since now we have a bunch of miniCIMs with cut shafts and we need ones without.
Perhaps you could 3D print a spacer the right size. |
|
#3
28-01-2014, 20:38
|
||||
|
||||
|
Re: Mounting VersaPlanetary to CIM/MiniCIM
If I am not mistaken, the shaft key will not engage with spacers on. However, if you extended the key slot it might be possible to use spacers successfully.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
