pic: Team 4096 - New Kicks

[jzeiders]

loading photo ...

[Christopher149]

Hopefully the inspectors don't call you out on your "Death Trap". Safety is important.

Are those 4 CIMS in the kicker? Because it looks like 4 CIMS also in the mecanum.

[dellagd]

Those would appear to be two CIMs and two mini-CIMs in the kicker.

[omsahmad]

Also note I think your mecanums are on backwards. They are supposed to form an "X" from the top, not a diamond (imagine extending the pins of the rollers out. They should point towards the center of the robot.

Correct: http://www.chiefdelphi.com/forums/sh...5&postcount=10

Incorrect: http://www.chiefdelphi.com/media/photos/20664

[EricH]

Originally Posted by omsahmad

Also note I think your mecanums are on backwards. They are supposed to form an "X" from the top, not a diamond (imagine extending the pins of the rollers out. They should point towards the center of the robot.

Correct: http://www.chiefdelphi.com/forums/sh...5&postcount=10

Incorrect: http://www.chiefdelphi.com/media/photos/20664

Actually, other way around. An X on top means a diamond on bottom, which makes for some difficulty turning in place.

You're correct if you're looking from the bottom, but you're looking from the top.

[PAR_WIG1350]

Originally Posted by EricH

Actually, other way around. An X on top means a diamond on bottom, which makes for some difficulty turning in place.

You're correct if you're looking from the bottom, but you're looking from the top.

Are you sure? Assuming force is applied along the roller axles, the vectors seem to work out better for turning (torque not equal to zero) when they form a diamond on the bottom.

[Arpan]

@Rule inspectors, looks like they're planning to have a pop-out box that covers the backswing of the hammer.

Thing is still terrifying , though. We're going to be staying well away from it

[pntbll1313]

Originally Posted by EricH

Actually, other way around. An X on top means a diamond on bottom, which makes for some difficulty turning in place.

You're correct if you're looking from the bottom, but you're looking from the top.

No, it needs to be an X from the top, and a diamond from the bottom. omsahmad is correct, they are on backwards.

From Top:
\.........../
\.........../
\.........../
.............
.............
/...........\
/...........\
/...........\

From bottom:

/...........\
/...........\
/...........\
.............
.............
\.........../
\.........../
\.........../

[itsjustmrb]

I believe the quote used in the past was

O from below
make mecanum go

[jzeiders]

Originally Posted by pntbll1313

No, it needs to be an X from the top, and a diamond from the bottom. omsahmad is correct, they are on backwards.

From Top:
\.........../
\.........../
\.........../
.............
.............
/...........\
/...........\
/...........\

From bottom:

/...........\
/...........\
/...........\
.............
.............
\.........../
\.........../
\.........../

So we have fixed it to the "X" but out of curiosity what is the reasoning for mounting it that way?

[avanboekel]

Everywhere I've read says x on top, diamond on bottom. Does anyone know why this is? It seams kind of counter intuitive to me...

[GortGortGort]

Originally Posted by jzeiders

loading photo ...

If you don't mind could you share what gear ratio you have in the toughbox ?

[jzeiders]

Originally Posted by GortGortGort

If you don't mind could you share what gear ratio you have in the toughbox ?

We used 8.45:1