|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
pic: FRC229 Teaser #1
|
|
#2
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
Some sort of "brake" that you plant into the carpet.
|
|
#3
|
|||
|
|||
|
Re: pic: FRC229 Teaser #1
I think it's to get out of being t-boned.
Could also drop a ball caster on there. |
|
#4
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
I am with Akash. It looks like a set of skids on pistons with very slick plastic. Likely to do a "quick turn" or reduce scrub issues.
|
|
#5
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
I don't think you would make a break out of rounded Delrin.
Maybe something to angle the entire robot to shoot...but the bore doesn't look large enough, even if there were 2 of them... |
|
#6
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
A stabilizer to prevent the robot from rocking about dropped center wheels while shooting the ball?
|
|
#7
|
|||
|
|||
|
Re: pic: FRC229 Teaser #1
Get out of t-bone card.
|
|
#8
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
Could it be a integrated jacks so you can more easily work on the robot in the pits?
|
|
#9
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
It's a drift mechanism! Like Mario Cart, taking a turn too tight, too fast? No big deal!
If that's correct, I like the idea a lot! I look forward to seeing it in action. Also, I appreciate good teasers like this. It's almost refreshing ![]() |
|
#10
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
More importantly I see a strap which implies a kicker hard stop at least in my mind. With that line I reasoning I guess that the robot has a "Kicker Arm".
|
|
#11
|
||||
|
||||
|
Re: pic: FRC229 Teaser #1
It's the secret endgame mechanism
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|