|
|
|
 Karthik was never one to shy away from the spotlight (often to the chagrin of anyone within sight or earshot of him :p ). - Travis Hoffman [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Karthik was never one to shy away from the spotlight (often to the chagrin of anyone within sight or earshot of him :p ). - Travis Hoffman [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
replace Cypress with Arduino?
our Cypress is MIA, working on custom control panel. We got what we need working working with an HID look-a-like, but am thinking about doing a cypress lookalike with a Arduino (should be able to emulate, theoritically).
Has anyone looked at this yet? I am aware of the estop CCI, and will go that route if necessary, but we have some programming bandwidth right now.... 
|
|
#2
18-02-2014, 12:40
|
||||||
|
||||||
|
Re: replace Cypress with Arduino?
Here is a recent similar thread: http://www.chiefdelphi.com/forums/sh...d.php?t=126237
|
|
#3
01-03-2014, 12:39
|
|||
|
|||
|
Re: replace Cypress with Arduino?
http://www.chiefdelphi.com/forums/sh...d.php?t=121540
I made my own controller this year using an accelerometer and an Arduino. It's pretty cool. I used an MPU6050 3-axis accelerometer and an Arduino Uno. I also used an LCD screen to present the speed it sends out to Driver Station. There are some pics in the referenced thread. Good luck! Alex Brinister
|
|
#4
02-03-2014, 22:53
|
||||
|
||||
|
Re: replace Cypress with Arduino?
got it working. Need an Arduino Leonardo, read http://www.imaginaryindustries.com/blog/?p=80 (it involves making a couple of changes to your Arduino development environment), and...
voila! my Arduino thinks it's a 8 axis 32 button joystick...
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
