pic: 1678's 2014 Robot - Beca

[cavalier]

loading photo ...

[MrTechCenter]

Simply amazing. This thing is a powerful and sturdy machine. I can't wait to see it perform at Championships!

[TKM.368]

Like!

[kevincrispie]

Awesome robot. Glad I got to see this in person a few times. I think 1678 built one of the most versatile robots in the world this year. They can play a variety of positions, and will nail you with hard defense, something we certainly found out.

Something I meant to ask: is there any logic behind the different colored wheels on the ball holder inside the robot? (Blue vs Orange) Are those banebots wheels as well? Was the wheel color chosen for aesthetics, or was it because of the vendor supply, and that was the only color available in the right size/durometer? Regardless both subsystems worked very well. A very nice machine from the Citrus Circuits this year.

[DampRobot]

And to think only last year, your wiring looked like this...

Amazing job this season. You've risen from a "what number again?" team at the 2011 SAC regional to a truly world class team in 4 short years. Congratulations on the awesome season guys, and good luck at CMP.

[Akash Rastogi]

What's the story behind the name?

[Anteprefix]

Originally Posted by Akash Rastogi

What's the story behind the name?

It's to honor and remember one of our mentor's (Devin Castellucci) late wife. She passed away last summer.

[Akash Rastogi]

Originally Posted by Anteprefix

It's to honor and remember one of our mentor's (Devin Castellucci) late wife. She passed away last summer.

Thank you. I'd bet anything that she is proud

[ErvinI]

Why do you guys have a different BB wheel arrangement between your two intakes? That's bugging me .

[Michael Corsetto]

Originally Posted by kevincrispie

Something I meant to ask: is there any logic behind the different colored wheels on the ball holder inside the robot? (Blue vs Orange) Are those banebots wheels as well? Was the wheel color chosen for aesthetics, or was it because of the vendor supply, and that was the only color available in the right size/durometer? Regardless both subsystems worked very well. A very nice machine from the Citrus Circuits this year.

Basic answer: The team had hundreds of dollars worth of Banebots wheels left over from last seasons frisbee shooter version one. They're all 1/2" hex bore, so the whole grabber assembly really came together quite simply.

Slightly longer answer: We use the orange wheels on the primary intakes because we a) had more of them and b) they're slightly gripper than the blues. We use the blues on the secondaries because they wear out slower, and the secondaries tend to rub on the ball for longer periods of time during our ball settling routine.

Originally Posted by ErvinI

Why do you guys have a different BB wheel arrangement between your two intakes? That's bugging me .

Pickup geometry is not the same on both sides. There is a gap between wheels in the front intake to allow the ball to pass through without jamming. Stuff you figure out after the whole thing comes together

[Citrus Dad]

Originally Posted by Michael Corsetto

Basic answer: The team had hundreds of dollars worth of Banebots wheels left over from last seasons frisbee shooter version one. They're all 1/2" hex bore, so the whole grabber assembly really came together quite simply.

...And the business team was not happy about the situation...