|
|
|
 Our robot-in-progress got set on the scale yesterday, It came to about 115 pounds. Then I walked up and took out the battery, and everyone relaxed some. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
REV Bushing
Does anyone know a another company that i can get bushings similar to these? http://www.andymark.com/product-p/am-2903.htm
 they are sold out from andymark and my team is in desperate need to get some.
|
|
#2
18-01-2015, 00:04
|
||||
|
||||
|
Re: REV Bushing
Last edited by Mike Marandola : 18-01-2015 at 00:18.
|
|
#3
18-01-2015, 00:07
|
||||
|
||||
|
Re: REV Bushing
I can't find anything exactly the same.
If you have a lathe, or lathe access, you could potentially turn some of this down to 3/8, and get something comparable. http://www.mcmaster.com/#91780a920/=vij7cg Last edited by wasayanwer97 : 18-01-2015 at 00:11. Reason: swapped link to aluminum version for easier machining.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
