|
|
|
 You don't become great because of your sponsors, you become sponsored because of your greatness. - Bdf809 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| You don't become great because of your sponsors, you become sponsored because of your greatness. - Bdf809 [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
FRC 2015 Control System Visio Stencils
Hi All,
My son put together some handy stencils for Visio that will let you create a quick wiring layout for the control system. I put them up on our team's GitHub page at: https://github.com/kpeirce/FRC2015ControlsVisioStencils Hints: 1. The connectors (cables or wires) must be on the layer above the component (e.g. roboRio) to be able to connect to the attachment point on the component. 2. For cables composed of multiple wires, there are single attachment points. This permits easier connection with the cable connectors (e.g. CANbus). (As opposed to trying to connect each individual wire.) Hopefully this will assist folks. See you on the field! Ken 
|
|
#2
21-01-2015, 22:14
|
||||
|
||||
|
Re: FRC 2015 Control System Visio Stencils
Nice set. Just what I was looking for as a matter of fact.
Just need regular Talons and Victors and a real representation of the Dlink. Last edited by goofy173 : 22-01-2015 at 14:22.
|
|
#3
27-01-2015, 19:14
|
|||
|
|||
|
Re: FRC 2015 Control System Visio Stencils
Zachary added the older control systems components that were requested along with a more realistic router.
Go to: https://github.com/kpeirce/FRC2015Co...ls/tree/master and download the zip file. Enjoy!
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
