|
Our Talon SRX encoder breakout board design
We didn't like the encoder breakout board offered by CTRE for the Talon SRX, so we made our own. It bolts on top of the Talon and has four 0.1" connectors. The encoder matches the AMT102 encoders, and the rest are standard 3 pin PWM connectors. The three holes make the lights and button accessible.
Top view:
http://www.bitbuckets.org/wp-content.../01/talen1.png
Side view:
http://www.bitbuckets.org/wp-content.../01/talen2.png
We made 20 boards as prototypes, and have a half dozen extras if anyone wants to try them out. They were made for us free of charge by Advanced Circuits in Colorado. Thanks, 4pcb.com!
__________________
--David Forbes
Mentor, Bit Buckets team 4183. Assistant cat herder and dispenser of legendary tales.
Need a Nixie watch? Yes, you do. Ask me.
|
An opportunity is always there waiting to be discovered, we just have to look and then see what we can do to help create change. - JaneYoung [more] 
Hybrid Mode
