FIRST Stronghold Simulator

[Poseidon5817]

For those of you who are using the new Autodesk Synthesis software, I went ahead and imported the field into the simulator. You can find it here.

To install, get Synthesis, then download and move the folder to C:/Program Files x86/ Autodesk/Synthesis/Synthesis/Fields.

[Gamma +]

Hey, the link in your post sends me to dropbox, but it gives me an error that says "The file you’re looking for has been moved or deleted."
Thanks in advance

[Mat]

If you could fix the link I would really appreciate it. Thanks

[Poseidon5817]

Let's try this again:

Google Drive link

To use these, download and put them in a folder named "2016" and move the folder to the Synthesis fields folder in Program Files.

[Dillan_McDonald]

Currently, at least with the downloaded field, the doors have all disappeared or are misplaced and the cheval de frise is permanently affixed. However, it is still a very useful tool for the testing of many other potential subsystems and code! Thanks a bunch Poseidon1671.

[Poseidon5817]

Originally Posted by Dillan_McDonald

Currently, at least with the downloaded field, the doors have all disappeared or are misplaced and the cheval de frise is permanently affixed. However, it is still a very useful tool for the testing of many other potential subsystems and code! Thanks a bunch Poseidon1671.

I did that purposefully, as most of the obstacles are impossible to go through because they were fixed. I also removed the curtain from the low bar so teams can try going under that too. If you want the unedited version, you can download the field CAD files here and use Synthesis's field exporter to load it.