Labview Project, how to start?

[AmAlienRobot]

Last year we used a My RoboRio project build but this year there is no project called my RoboRio when we go to create project. If you could give us help with this we'd love you 5ever.

[jojoguy10]

I would suggest looking at the WPI ScreenSteps webpage for a "Getting Started"-type guide. Then, if you have other questions, we'll be ahppy to answer them :-)

http://wpilib.screenstepslive.com/s/4485/m/13811

[RufflesRidge]

Originally Posted by jojoguy10

I would suggest looking at the WPI ScreenSteps webpage for a "Getting Started"-type guide. Then, if you have other questions, we'll be ahppy to answer them :-)

http://wpilib.screenstepslive.com/s/4485/m/13811

Specifically, you're likely missing the 2016 Update Suite.

[AmAlienRobot]

Senior RuffleRidge, we already made the update, but thanks anyways. Other guy complaining about our multiple threads I refuse to apologize for something that was not a mistake nobody responded fast enough.

[RyanN]

Originally Posted by AmAlienRobot

Senior RuffleRidge, we already made the update, but thanks anyways. Other guy complaining about our multiple threads I refuse to apologize for something that was not a mistake nobody responded fast enough.

Sometimes just posting a 'bump' in the thread. I watch this folder throughout the day as my job permits. You gave 20 minutes between creating the two threads at 7PM. Guess what I, and probably most other teams are doing at 7PM? Probably meeting with their team! Be patient!

You said you installed the update. When you open LabVIEW, do you see this screen:
http://wpilib.screenstepslive.com/s/...age_id=8030575

If not, then you did not install the update, or it didn't install successfully.

Here's a link to the page where you can get the update: https://decibel.ni.com/content/docs/DOC-46527

Follow the instructions here:
http://wpilib.screenstepslive.com/s/.../13811/c/57243

[AmAlienRobot]

I actually end up on a different start then what people have been posting

[rzoeller]

Originally Posted by AmAlienRobot

I actually end up on a different start then what people have been posting

It doesn't look like you have installed the update suite. Perhaps try installing it again?

[AmAlienRobot]

Okie dokie I'll try again thanks.

[AmAlienRobot]

So I downloaded the stuff at the link that you sent me here: http://www.ni.com/download/labview-f...-15.0/5774/en/
And all that did was download a zipfile, which I couldn't open? Help some more? Much appreciated.

[Omar]

Did you use the encryption key in the links that jojoguy10 and RyanN pointed you to.
The encryption key is about one screen down on the
"Installing the FRC 2016 Update Suite (All Languages)" page

READ THE INSTRUCTIONS!

RIght click on the downloaded zip file and select Extract All. If you downloaded the encrypted zip file, you will be prompted for encryption key

[RyanN]

Originally Posted by Omar

Did you use the encryption key in the links that jojoguy10 and RyanN pointed you to.
The encryption key is about one screen down on the
"Installing the FRC 2016 Update Suite (All Languages)" page

READ THE INSTRUCTIONS!

RIght click on the downloaded zip file and select Extract All. If you downloaded the encrypted zip file, you will be prompted for encryption key

It's in red text on the page: @Ahead)Together!FRC^2016