Starting configuration

[Streetbots]

Can someone explain the starting configuration, such as the distance from robot to robot? Any visual with measurements is appreciated.

[EricH]

Originally Posted by Streetbots

Can someone explain the starting configuration, such as the distance from robot to robot? Any visual with measurements is appreciated.

Starting Configuration is the way YOUR robot starts the match, irrespective of placement on the field.
--Everything inside the Frame Perimeter
--Everything under the height limit of 54"

What you're looking for is G7.

Originally Posted by THE MANUAL

G7 When placed on the FIELD for a MATCH, each ROBOT must be:
A. in compliance with all ROBOT rules, i.e. has passed Inspection (for exceptions regarding Practice MATCHES, see Section 5 (5.5.2 Eligibility and Inspection)),
B. not in contact with a BOULDER staged on the MIDLINE,
C. the only item left on the FIELD by the DRIVE TEAM,
D. confined to its STARTING CONFIGURATION,
E. fully contained by the opposite half of the FIELD from their TOWER, and
i. breaking the plane of the AUTO LINE, or
ii. inside the COURTYARD, in contact with both the CASTLE WALL and GUARDRAIL.
Only one (1) ROBOT per ALLIANCE, known as the “spy bot,” is allowed to start each MATCH in this position.

See the bold text.

There is no robot-robot distance (other than that the alliances aren't hitting each other).

[David Brinza]

Starting configuration is the static configuration of your robot prior to the start of the match. All of your robot components need to be inside the frame perimeter and below the maximum starting configuration height.

The robot inspection process verifies your robot can meet the starting configuration rules. Before matches, referees will look at your robot to make sure actually are complying with starting configuration rules (nothing sticking out beyond the frame, etc.).

Edit: sniped by EricH! (What he said...)

[Sky Captain]

For G7Eii: inside the COURTYARD, in contact with both the CASTLE WALL and GUARDRAIL.


Does this mean we can put our robot at a 45 degree angle so that it touches both the wall and guardrail and still avoid breaking this rule?

[maxnz]

It also has to break the vertical plane of the auto line (i.e. Have any part (including bumpers) above it)

[GeeTwo]

Originally Posted by Sky Captain

For G7Eii: inside the COURTYARD, in contact with both the CASTLE WALL and GUARDRAIL.


Does this mean we can put our robot at a 45 degree angle so that it touches both the wall and guardrail and still avoid breaking this rule?

That's certainly how I read it; you can be square in the corner, or at any oblique angle, as long as you're in contact with both boundaries.