|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
T-Boning a Rhino Track Drive
|
|
#2
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
I notice the Rhino driver seemed careful to not drive forward until the opponent eased back. I don't know if students in the heat of a match will be that careful. With that tread pushed back so far I'd still be worried about a derailment.
|
|
#3
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
Firstly, Thank you!
This looks pretty promising on the treads durability, and this should be a good starting point to show the feasibility of treads (not that it would really matter by now for this year) That doesnt go without saying the real world never plays out like synthetic testing, its going to be interesting to see how these actually hold up in competition. |
|
#4
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
What is just as interesting as the rhino performance is the KOP performance with the pneumatic wheels.
It seems to be browning out when stalled. The 12 second, 42 second, and the last two pushing matches is where it looks jumpy (my assumption is brownout, wheels don't appear to slip). When the robot is moving, it doesn't seem to have the issue. I wonder what that spells for many upgraded KOP drives with 8" wheels without an upgrade to the transmissions. Time will tell. Last edited by Deke : 03-02-2016 at 22:12. |
|
#5
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
I wonder if some teams running treads will have any tricks built in to prevent t-bones?
|
|
#6
|
|||||
|
|||||
|
Re: T-Boning a Rhino Track Drive
how do you prevent a team from pushing you?
|
|
#7
|
|||||
|
|||||
|
Re: T-Boning a Rhino Track Drive
Drop down omni wheels or ball casters so you spin instead of getting tboned.
|
|
#8
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
what happens if they go head to head with each other?
|
|
#9
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
My money is on the tank treads winning
![]() |
|
#10
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
Both the treads and the pneumatic wheels have a lot of traction, I think when head to head it would be the gear-ratios which matter the most. Keep in mind that most teams using the Rhino Track system will be using the 2 CIM Toughbox Mini, not a shifting gearbox.
I feel that pneumatic wheels can beat a tank tread chassis head to head. But it is dependent on gear ratios Last edited by pilleya : 04-02-2016 at 04:25. |
|
#11
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
This video clip has some instances of what I think will happen. My money is on the pneumatic tires.
|
|
#12
|
||||
|
||||
|
Re: T-Boning a Rhino Track Drive
That's some seriously disgustingly nasty dirty carpet. Can't AM afford a shop vac?
![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|