pic: Mini "Belly Pans" for Talons

[bEdhEd]

loading photo ...

[s5511]

What is the name of those connectors you are using on your Talon SRX power and motor wires?

We are currently designing our electronics board, too, and we need our Talon SRXs to be hot-swappable, and easy to take in and out.

Thanks!

[serenagh]

Those look like anderson powerpoles to me. They are pretty common in FRC applications. Link: http://www.powerwerx.com/anderson-po...owerpole-sets/

[bEdhEd]

Originally Posted by serenagh

Those look like anderson powerpoles to me. They are pretty common in FRC applications. Link: http://www.powerwerx.com/anderson-po...owerpole-sets/

Yup, exactly. They're awesome.

[cbale2000]

Originally Posted by serenagh

Those look like anderson powerpoles to me. They are pretty common in FRC applications. Link: http://www.powerwerx.com/anderson-po...owerpole-sets/

Also worth noting, you can buy them in bulk at Andymark: http://www.andymark.com/product-p/am-2912.htm, though you need a proper crimping tool for them.

[philso]

We are doing something like this too. Are your panels screwed on somehow? Are you using the latching connectors from Hansen Hobbies for the CAN bus wires or something similar?

[Christopher149]

Originally Posted by cbale2000

Also worth noting, you can buy them in bulk at Andymark: http://www.andymark.com/product-p/am-2912.htm, though you need a proper crimping tool for them.

We recently bought the crimping tool, and it has made life MUCH MUCH easier. Do buy the tool if you want to use Power Poles.

[ratdude747]

Looks slick and elegantly compact. So much better than the old days of making room for a 3x3 grid of Jaguars (that was "fun"). Actually, one can still legally do that ...

[Ty Tremblay]

Looks familiar.

[Ryan Dognaux]

Originally Posted by Ty Tremblay

Looks familiar.

Looks familiar to our board last year - http://www.chiefdelphi.com/forums/sh...6&postcount=11

Very clean!

[Monochron]

Originally Posted by s5511

What is the name of those connectors you are using on your Talon SRX power and motor wires?

We are currently designing our electronics board, too, and we need our Talon SRXs to be hot-swappable, and easy to take in and out.

Thanks!

If you want to try them out before committing, swing by our lab across the street from you guys and grab a couple We've standardized on Anderson's and it has been fantastic!