|
|
|
![]() |
|
|||||||
|
||||||||
| View Poll Results: What drive train will your robot have? | |||
| 2 CIMs per side (toughbox mini) |
|
23 | 30.26% |
| 2 Mini-CIMs per side (toughbox mini) |
|
0 | 0% |
| 2 CIMS per side (CIMple box) |
|
5 | 6.58% |
| 2 Mini-CIMs per side (CIMple box) |
|
1 | 1.32% |
| 1 CIM or Mini-CIM per side |
|
2 | 2.63% |
| Other (mention below) |
|
39 | 51.32% |
| We aren't going to drive |
|
6 | 7.89% |
| Voters: 76. You may not vote on this poll | |||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Gearing and Drive Motors
After seeing my team's robot drive, I have begun to consider changing up the motors in out drive train. But, I want to see what the CD consensus is before I do so. What are you putting on your robot?
|
|
#2
|
|||
|
|||
|
Re: Gearing and Drive Motors
Andymark gearboxes aren't the only ones out there.
Maybe instead of having the gearbox name, have something like "2 CIM 15feet/sec." That is, unless you want to know what specific gearboxes people are using. |
|
#3
|
|||
|
|||
|
Re: Gearing and Drive Motors
We're using 2 cims per side with independent middle wheels running mini cims in a tougbox mini. |
|
#4
|
||||
|
||||
|
Re: Gearing and Drive Motors
I just figured that I would put these two gearboxes because the majority of robots that I have seen use these two gearboxes.
|
|
#5
|
|||||
|
|||||
|
Re: Gearing and Drive Motors
I doubt you will see many CIMple box robots this year. Even with 4" wheels, they are geared too fast (15+fps) for this game with ramps and obstacles and obstructions that give you few opportunities to drive more than 20 feet in a relatively straight line.
We're gearing our TB-minis all the way down to 12.75 on a 4" wheel, then farther down with chain to our 8" wheels. It's a top speed of only 5.6 fps, but we reach it practically instantly and eat most of the defenses for breakfast, and the others for lunch. |
|
#6
|
||||
|
||||
|
Re: Gearing and Drive Motors
We've got 2 CIMs per side running AndyMark SuperShifters.
|
|
#7
|
||||
|
||||
|
Re: Gearing and Drive Motors
2 CIMS per side geared for approximately 9.8 FPS
|
|
#8
|
||||
|
||||
|
Re: Gearing and Drive Motors
Quote:
- Sunny G. |
|
#9
|
||||
|
||||
|
Re: Gearing and Drive Motors
WCP DS Shifter with 2 CIMS per side
|
|
#10
|
|||||
|
|||||
|
Re: Gearing and Drive Motors
CIMs are overrated
![]() |
|
#11
|
|||
|
|||
|
Re: Gearing and Drive Motors
2 CIMs per side with VexPro single speed double reduction gearboxes.
|
|
#12
|
|||||
|
|||||
|
Re: Gearing and Drive Motors
We're using 2 CIMs per side in a gearbox based off 1114's 2014 Gearbox.
|
|
#13
|
|||
|
|||
|
Re: Gearing and Drive Motors
Quote:
![]() See you at Bayou. We are looking forward to having fresh beignets again. |
|
#14
|
|||||
|
|||||
|
Re: Gearing and Drive Motors
Wouldn't miss it!
Wouldn't miss it! |
|
#15
|
|||
|
|||
|
Re: Gearing and Drive Motors
There is a Cafe Du Monde between our hotel and the Pontchartrain Center. Hopefully I can save one for you.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|