|
|
|
 I have long since given up on these hints, and come to the conclusion that they are designed to befuddle us all and amuse Dave. - Rickertsen2 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I have long since given up on these hints, and come to the conclusion that they are designed to befuddle us all and amuse Dave. - Rickertsen2 [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Frame Perimeter Protrusions?
We are looking at our frame perimeter and our ball intake wheel sticks out 1 inch from our frame. The wheels are also located in an opening in our frame. Is this legal or not? Thanks.
|
|
#2
22-02-2016, 21:52
|
|||||
|
|||||
|
Re: Frame Perimeter Protrusions?
I can't see a picture, so I can't fully comment, but here are some things to keep in mind:
1" for a wheel is probably going to be too much for a "minor protrusion". That intake wheel will define the Frame Perimeter. Unfortunately, it's active, so that would be an articulated Frame Perimeter, so it's illegal. I suggest a redesign... |
|
#3
22-02-2016, 21:56
|
||||
|
||||
|
Re: Frame Perimeter Protrusions?
Does the wheel move and if so in one position does it fit inside the frame? If not then time for a last minute redesign.
|
|
#4
22-02-2016, 22:13
|
|||
|
|||
|
Re: Frame Perimeter Protrusions?
Thanks for the quick reply. Redesign in progress. Hoping for a hail mary
 |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
