|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Firmware Version Verification
How do we check the firmware on the PDP and PCM to ensure that we have the required versions?
Thanks! |
|
#2
|
||||
|
||||
|
Re: Firmware Version Verification
If you connect to your robot with laptop and boot up the driver station, you can see the versions in the second tab
|
|
#3
|
||||
|
||||
|
Re: Firmware Version Verification
Please read the FRC instructions for checking and field-upgrading the various control system components.
https://wpilib.screenstepslive.com/s...ware-revisions |
|
#4
|
|||||
|
|||||
|
Re: Firmware Version Verification
Here's another screen shot like Owen's with the versions populated after the Driver Station communicates with the roboRIO.
Last edited by Mark McLeod : 23-02-2016 at 17:04. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|