|
|
|
 Temp wiring is always bad but it is made worse when dealing with a $1000 part. You wouldn't try to lash a makeshift power source to your PC. - Al Skierkiewicz [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Temp wiring is always bad but it is made worse when dealing with a $1000 part. You wouldn't try to lash a makeshift power source to your PC. - Al Skierkiewicz [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Team 1658 practice + bonus basketball!
X-post:
https://www.reddit.com/r/FRC/comment...us_basketball/ Some defenses and shooting high goals: https://youtu.be/rtUbrlblXVY Basketball round two: https://youtu.be/FRm45rigpLw Basketball round three: https://youtu.be/k4_kJA86AYE It's naked! https://imgur.com/B8XtQoE Last edited by sanelss : 23-02-2016 at 20:19. |
|
#4
24-02-2016, 10:55
|
|||
|
|||
|
Re: Team 1658 practice + bonus basketball!
With all the abuse we put them under so far, they seem to be handling just fine. If you look at the picture you can see we have wedges which transfer all the force into the frame of some obstacles like rock wall and ramparts but for the lower ones like rough terrain and moat it helps that we took the inner tubes out so most of the impact force will be dampened by the very compliant tires. So far we haven't had an issue and we don't expect it to be an issue either.
We do only have half inch round stainless steel vertical shafts for steering the swerve modules so the potential is there for those to get bent with enough force but it doesn't look like a typical game will come anywhere near the force required to do that but it's certainly possible. Like everything else with FRC bots it's a tradeoff and we thought this was a worthwhile pursuit as an offensive scoring robot to be able to out menouver any potential defense bots Last edited by sanelss : 24-02-2016 at 10:59. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
