Drawing Confusion

Gadget470 · #1 07-10-2002, 21:07

While building our tall towers we hit a confusing block.

In one drawing the PVC is aligned as:

Code:

   : :
: :  : :
   : :
whereas another one is:
   . .
: :  : :
   '  '

--- will edit later with a picture ---

basically, top one is 4 seperate pvc tubes for each tower (16 total), second is a central 4 tubes with two outer tubes for each (

Justin Howard · #2 08-10-2002, 07:56

The field layout is incorrect. There should only be 12 PVC pipes not 16.

Gadget470 · #3 09-10-2002, 13:25

Thanks, so crappy ascii drawing #2 from my post it is

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help drawing my ideas	Keith Chester	Technical Discussion	12	08-11-2003 20:09
Maxi Block Confusion?	Adam Shapiro	Electrical	11	26-01-2003 20:23
This years Feild CAD drawing needes in .DXF format	archiver	2000	1	23-06-2002 22:51
Additional Hardware list confusion	archiver	2001	4	23-06-2002 22:29
New Field Drawing	Brandon Martus	OCCRA	3	25-11-2001 17:31