How did you scale?

[frcguy]

As we're thinking about adding a scaling mechanism to our robot this offseason I'm curious to see how other teams accomplished scaling this past season. Post details of your team's scaling mechanism below! Thanks in advance.

[ttnn58]

a telescopic arm with a dragon shaped hook on the top:
https://youtu.be/gwu25xif6Tw?t=2m11s
to open it we use 4 pistons (2 for each level)
and to close it we also have 2 window motors to pull the robot up and another window motor to fold the robot

[cad321]

An idea we were seriously considering was a mechanism powered by stored energy. The idea was to have 2 gas springs (normally retracted) and have a winch to pull it open. The springs would have enough force between the 2, to lift the bot (~85lbs-100lbs of force each). This would alow us to take advantage of the extra 5 seconds after the buzzer goes to climb. Theoretically giving us an extra 5 seconds of match play.

The biggest reason we left the idea behind was the lead time on the springs. It is very easy to find gas springs that are normally extended, however we had a very tough time finding a supplier with normally retracted springs in the size we needed and that could have them in under 2 weeks (preferably less). I'd love to see this pulled off. Perhaps a good off season project for someone. I heard people talk about this concept, but I don't recall seeing a team actually implement it this year. If anyone knows of a team that did, id love to see it.

[KohKohPuffs]

Originally Posted by cad321

An idea we were seriously considering was a mechanism powered by stored energy. The idea was to have 2 gas springs (normally retracted) and have a winch to pull it open. The springs would have enough force between the 2, to lift the bot (~85lbs-100lbs of force each). This would alow us to take advantage of the extra 5 seconds after the buzzer goes to climb. Theoretically giving us an extra 5 seconds of match play.

The biggest reason we left the idea behind was the lead time on the springs. It is very easy to find gas springs that are normally extended, however we had a very tough time finding a supplier with normally retracted springs in the size we needed and that could have them in under 2 weeks (preferably less). I'd love to see this pulled off. Perhaps a good off season project for someone. I heard people talk about this concept, but I don't recall seeing a team actually implement it this year. If anyone knows of a team that did, id love to see it.

I recall talking to 254 about potential climber designs at SVR. They did talk about using two gas springs, which would be retracted and held like that using pancake cylinders. When the pistons were activated, the gas springs would extend, and a winch gearbox would be used to retract the gas springs to pull the robot up. However, looking at their technical binder, it seems they used surgical tubing instead, I guess since it's more cost-efficient than gas springs.

By the way, have you tried mcmcaster.com for finding the gas springs you need? I believe that website has a wide assortment of those in various sizes.

[TheBoulderite]

We used gas springs. Watch the end of this video to see it in action. https://youtu.be/8w9TLPjWI4Q

[NShep98]

Our scaler sucked pretty badly. The only match we successfully got up high enough was never recorded. The arm the we used to manipulate defenses was also a 2 stage linear slide elevator with a spring-loaded hook on the end of it. Once the hook got in place, the arm would pull away, leaving the hook attached to a seatbelt on a winch that was supposed to pull us up. Being that the winch was situated at the back of the robot, it would pitch forward, so we added 2 lengths of paracord to the winch that looped around the front of the robot to keep us level.

In theory, this would work, except for a number of issues including the hook being knocked out too early in a match, the seatbelt and/or paracord getting tangled or frayed, the winch jamming, and plenty of other fun setbacks. The moral of the story for this approach is planning.

[AlexanderLuke]

Team 696 used a pair telescoping arms that were assisted out by constant force springs, and then retracted back by high tensile strength cord that ran through the arms and became wound around a spool for each respective arm. The entire assembly was driven by a custom winch gearbox with a pneumatically actuated ratchet and pawl.

You can see the arms in our 2016 robot release picture and thread, as well as in this picture taken from the Los Angeles regional. This is also a video taken from the Ventura Regional that shows us on the red alliance in qualifications scaling (I do not take credit for the video).

They were very successful for us and often worked with little issue.

[Jeremy Germita]

We added a scaling mechanism for Championships. At the event, we fought some silly consistency issues that we really should have hammered out at home. The hook had a 2/10 success rate with only one of those attempts finishing in a successful scale.

After 118's reveal video came out, we began prototyping harpoon style scaling as it made the most sense for the machining resources, robot weight budget, and time available to us. I think we had a working idea of a surgical tubing powered harpoon shooter around the weekend before our first regional.

Development on a scaler slowed between Los Angeles and Las Vegas as we wanted to focus more on potential improvements to our (never fired in an official match) shooter.
After Las Vegas, we decided that scaling would give us the best chance of getting selected for alliance selections over our shooter, so we began more serious development on the scaling mechanism. We designed winch gearbox plates that were a direct drop-in replacement for our shooter motor mount plates. This allowed us to free up all of the real estate from shooting for a scaling mechanism. This was the "easy part". After calculating the proper gear ratio to lift ~140lb of robot+battery+bumpers(with some safety factor), this part of the system just worked. We used 1.9mm spectra cable as the winch line spooling onto 1/2" hex shaft. This is really good stuff for general robot use. Even when frayed and knotted, it kept on trucking. We ended up replacing the entire line when we arrived in St. Louis and again after our last qual match.

The next major component of the system was the firing mechanism. This was one of the more difficult components. We went through 8-9 iterations of this mechanism tuning different variables like barrel length, barrel dia(compared to the hook shaft dia - more on this in a bit), surgical tubing type/length/diameter/tension, and force required to lock the hook into place. We found that with this design, shot consistency increases as you increase the length of the barrel as the surgical tubing seems to have more time to send the hook flying in our desired direction. This component was built with a combination of 1x1 tubing, versaframe gussets, a few bits of 8020 brackets and two 3D printed parts(which could easily be made from delrin or some other plastics or even wood by hand). It's actually very simple. We'd probably do something similar again if we ever need a one-shot stored energy mechanism. Here's a 1/4 speed video of rev 6 firing.

The final component is the hook. This one saw ~20 iterations with variations in hook dimensions, materials, locking/closing mechanisms, and shaft length. Huge thanks has got to go out to team 842. We saw their scaling mechanism at Las Vegas and they've very graciously explained how their hook worked. Their mechanism was a HUGE inspiration for our version. This is the best picture I could find of the hook mechanism, you could also see one of the early revs of the hook in the 1/4 speed video of the firing mechanism. This is another very simple part. The "shaft" is a length of fiberglass driveway marker with a length of thunderhex shaft pressed onto the end. Early revisions of this component used Andymark churro shaft for the entire length. We moved away from this as it added a lot of unnecessary weight to the hook. This component was the most difficult component of the system. Many of the early issues was getting the hook to close on impact with the bar. Early on, we played with a bar that holds the hook open that gets pushed out of the way, allowing it to snap shut on the bar. We had difficulties with consistency and weight with this concept. After we saw 842's overcentered surgical tubing method, we knew this was the simplest and lightest concept we could implement. The version of the hooks that took the field on Galileo ended up being very similar in geometry and construction to 842's.

For this system, we developed a set of procedures to follow to ensure safe loading and transport of the robot. Without the winch line constraining the hook's flight, the stored energy in the system was enough to send the hook into our shop ceiling, piercing the ceiling tiles 1/2" deep. For robot transport, we NEVER stored the hook while energized. While in queue, we verify that the robot's air pressure is >90% (the locking/release mechanism relied on air pressure) and we don't load the hook until our robot's position was settled on the field. As far as mechanism controls goes, we have implemented a system where the operator had to hold an "enable" button before the firing button could activate the system. This prevented accidental firing on the field.
We learned from 118 and Bane in 2015 and this scaling mechanism in 2016 that stored energy systems should NOT EVER be taken lightly and teams must take utmost care in designing, handling, and operating such systems.

The scaling system was the most intensively prototyped system we've ever created. Ultimately, consistency issues bit us in the translation between the practice frame and the competition bot, but we learned so much about prototyping and which variables to watch for and tune. It was an incredible amount of fun to see this project grow from rev 1 of the firing mechanism all the way to fully scaling on Galileo Quals 60.

[Zac]

This past season with 1768 we used a 2 stage telescopic elevator for scaling. My favorite part of the mechanism was the fact that the entire thing, was driven by just one motor. The climbing sequence involved hooks that expanded in 2 directions, rotating the climber up from the stowed position, extending the elevator, and finally retracting the elevator to climb.

The hooks were folded into a closed position and held with stops, the entire lift was rotated down into a stowed position (with gas shocks springing it back up) and held down using a bearing. The advantage here is that the bearing actually facilitates elevator extension as the entire arm rotates out of the stowed position.

Additionally we used seatbelt strap to hold the arm once rotated up. We didn't want to put the gas shocks in tension. We used constant torque springs to create an automatic winding drum so that we didn't have to rewind the seatbelt strap every match.

I attached some pictures that show everything much better than I can explain it with words.

You can also read more about the climber on page 9 of Greg Woelki's 1768 Tech Binder

One of my favorite videos of the climb is this one (Lower right hand corner of the frame) which includes our favorite play of the season, the SLAM DUNK!

~Zac

[Mike Marandola]

Originally Posted by Jeremy Germita

We added a scaling mechanism for Championships. At the event, we fought some silly consistency issues that we really should have hammered out at home. The hook had a 2/10 success rate with only one of those attempts finishing in a successful scale.

After 118's reveal video came out, we began prototyping harpoon style scaling as it made the most sense for the machining resources, robot weight budget, and time available to us. I think we had a working idea of a surgical tubing powered harpoon shooter around the weekend before our first regional.

Development on a scaler slowed between Los Angeles and Las Vegas as we wanted to focus more on potential improvements to our (never fired in an official match) shooter.
After Las Vegas, we decided that scaling would give us the best chance of getting selected for alliance selections over our shooter, so we began more serious development on the scaling mechanism. We designed winch gearbox plates that were a direct drop-in replacement for our shooter motor mount plates. This allowed us to free up all of the real estate from shooting for a scaling mechanism. This was the "easy part". After calculating the proper gear ratio to lift ~140lb of robot+battery+bumpers(with some safety factor), this part of the system just worked. We used 1.9mm spectra cable as the winch line spooling onto 1/2" hex shaft. This is really good stuff for general robot use. Even when frayed and knotted, it kept on trucking. We ended up replacing the entire line when we arrived in St. Louis and again after our last qual match.

The next major component of the system was the firing mechanism. This was one of the more difficult components. We went through 8-9 iterations of this mechanism tuning different variables like barrel length, barrel dia(compared to the hook shaft dia - more on this in a bit), surgical tubing type/length/diameter/tension, and force required to lock the hook into place. We found that with this design, shot consistency increases as you increase the length of the barrel as the surgical tubing seems to have more time to send the hook flying in our desired direction. This component was built with a combination of 1x1 tubing, versaframe gussets, a few bits of 8020 brackets and two 3D printed parts(which could easily be made from delrin or some other plastics or even wood by hand). It's actually very simple. We'd probably do something similar again if we ever need a one-shot stored energy mechanism. Here's a 1/4 speed video of rev 6 firing.

The final component is the hook. This one saw ~20 iterations with variations in hook dimensions, materials, locking/closing mechanisms, and shaft length. Huge thanks has got to go out to team 842. We saw their scaling mechanism at Las Vegas and they've very graciously explained how their hook worked. Their mechanism was a HUGE inspiration for our version. This is the best picture I could find of the hook mechanism, you could also see one of the early revs of the hook in the 1/4 speed video of the firing mechanism. This is another very simple part. The "shaft" is a length of fiberglass driveway marker with a length of thunderhex shaft pressed onto the end. Early revisions of this component used Andymark churro shaft for the entire length. We moved away from this as it added a lot of unnecessary weight to the hook. This component was the most difficult component of the system. Many of the early issues was getting the hook to close on impact with the bar. Early on, we played with a bar that holds the hook open that gets pushed out of the way, allowing it to snap shut on the bar. We had difficulties with consistency and weight with this concept. After we saw 842's overcentered surgical tubing method, we knew this was the simplest and lightest concept we could implement. The version of the hooks that took the field on Galileo ended up being very similar in geometry and construction to 842's.

For this system, we developed a set of procedures to follow to ensure safe loading and transport of the robot. Without the winch line constraining the hook's flight, the stored energy in the system was enough to send the hook into our shop ceiling, piercing the ceiling tiles 1/2" deep. For robot transport, we NEVER stored the hook while energized. While in queue, we verify that the robot's air pressure is >90% (the locking/release mechanism relied on air pressure) and we don't load the hook until our robot's position was settled on the field. As far as mechanism controls goes, we have implemented a system where the operator had to hold an "enable" button before the firing button could activate the system. This prevented accidental firing on the field.
We learned from 118 and Bane in 2015 and this scaling mechanism in 2016 that stored energy systems should NOT EVER be taken lightly and teams must take utmost care in designing, handling, and operating such systems.

The scaling system was the most intensively prototyped system we've ever created. Ultimately, consistency issues bit us in the translation between the practice frame and the competition bot, but we learned so much about prototyping and which variables to watch for and tune. It was an incredible amount of fun to see this project grow from rev 1 of the firing mechanism all the way to fully scaling on Galileo Quals 60.

What kind of knot did you use to tie the Spectra to the hook?

[Jeremy Germita]

Originally Posted by Mike Marandola

What kind of knot did you use to tie the Spectra to the hook?

The knot we used is similar to the buntline hitch. The spectra was tied through a (deburred and chamfered!!)hole in the thunderhex portion of the hook shaft, shown in this picture. I don't believe there was any noticeable damage or fraying of the cable around the knot after use.

The same knot was used on the winch spooling shaft with a few turns of the spectra cable wrapped around.

[s_forbes]

Originally Posted by Mike Marandola

What kind of knot did you use to tie the Spectra to the hook?

We used Spectra as well! Can't recommend it enough. This was our knot of choice: https://www.youtube.com/watch?v=d0B6tYTVHVM . (Dyneema is another brand name that's similar to Spectra) A splice like this gets rid of the tight bends that the rope sees in a traditional knot and makes for a stronger splice. The big benefit is that it's a lot easier to deal with than a normal knot.

We also used a variation on this splice that was adjustable, so we could make a length of rope with a fixed eye splice at one end and an adjustable eye splice at the other end, giving us a rope that we could make fine adjustments to the length. We used these ropes for our climbing rope, our suspension locking mechanisms, and the hard stop for our catapult.

With all of the crazy things going on with our robot last year, the splices we made with the Spectra lines was my favorite part. If you don't have some to play with, go buy some. It's one of those things that you never knew you needed until you used it.

[Maximillian]

5254 had two different scaling mechanisms that made it onto our robot. During build season we prioritized climbing very low so when we finally got around to building a scaler we were left without much space to put it.

For championships we built a 118 style grappling hook. This started with a prototype that was made out of a driveway reflector. This then turned into our final hook and launcher made out of a PVC pipe and a piece of 1x1 versatubing. The hooks were spring loaded closed with surgical tubing and held open by a bar that would break away when the harpoon hits the climbing bar. This worked on our practice bot but was never successful in competition. We were having a variety of robot issues at champs so we never had enough time to get it working.

For the offseason we designed a new intake with a climber that mounted on top. This mechanism was a scissor lift that is sprung upwards with surgical tubing. When winched down the hook would detach from the velcro and tape holding the hook to the robot. Our winch was a 775 Pro in a VersaPlanetary using 2 VersaHubs and a ratcheting wrench. You can watch one of the matches where it worked here.

[hectorcastillo]

We used a hook made out of two pieces of 0.25" lexan that was mounted onto the end of a 1x1 which slid on another 1x1 via the VEXpro linear motion kit. The hook was tied to a strap that went down to a winch. The winch was powered by a 775pro on a 100:1 versa planetary with two 0.5" ratcheting wrenches on the output shaft so that the shaft could only turn one way. As the winch turned, the strap would be let out in order to raise the hook. A constant force spring would extend the 1x1 lift and some surgical tubing would pull the 1x1s backwards away from the robot. When all of the strap was let out and the lift was at it's maximum extension, we would line up the hook against the bar and then continue turning the winch which would then spool the strap in the opposite direction. After getting lined up on the bar, the climb would take about 3 seconds. After the match we would then pull off one of the external gears in order to reset the climber for the next match. The entire mechanism ended up weighing around 6-7 pounds.

https://youtu.be/TjlrXFp4Ru0?t=140

https://drive.google.com/open?id=0B8...UxoTDhwc2pTbnc

[ollien]

Originally Posted by KohKohPuffs

By the way, have you tried mcmcaster.com for finding the gas springs you need? I believe that website has a wide assortment of those in various sizes.

Looks like they have them, but they're mighty expensive. I'm not sure how other springs stack up (admitantly I've never bought them) but they seem high at first glance.

http://www.mcmaster.com/#9502t5/=13q7aou