|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
NavX Micro Case
We found the case that is included to print did not work well. I sketched this up and it fit my board perfectly and with not broken tabs.
http://www.thingiverse.com/thing:1988260 ![]() |
|
#2
|
||||
|
||||
|
Re: NavX Micro Case
Cool
|
|
#3
|
||||
|
||||
|
Re: NavX Micro Case
Cool
|
|
#4
|
||||
|
||||
|
Re: NavX Micro Case
Cool?
|
|
#5
|
||||
|
||||
|
Re: NavX Micro Case
Cool!
|
|
#6
|
||||
|
||||
|
Re: NavX Micro Case
~Cool~
|
|
#7
|
|||
|
|||
|
Re: NavX Micro Case
ˇCool!
Last edited by Harrison.Smith : 12-21-2016 at 10:26 PM. |
|
#8
|
||||
|
||||
|
Re: NavX Micro Case
Mission complete, good job men.
![]() *Continue with serious discussion* What exactly was wrong with the provided case that you needed to design a replacement? Would you say the issues were major, or minimal? |
|
#9
|
|||
|
|||
|
Re: NavX Micro Case
In all seriousness, what prompted y'all to want a case for the NavX?
|
|
#10
|
|||
|
|||
|
Re: NavX Micro Case
Protection of the board and something to build a fastening system off of ie match holes in AM4U Chassis. The NavX (Micro) does not mount directly to the Roborio.
Last edited by cpapplefamily : 12-22-2016 at 11:18 AM. |
|
#11
|
||||
|
||||
|
Re: NavX Micro Case
Very neat! I like your Kangaroo case too.
|
|
#12
|
|||
|
|||
|
Re: NavX Micro Case
Quote:
|
|
#13
|
|||
|
|||
|
Re: NavX Micro Case
Quote:
Ok if we put a link to this on the navX-Micro website? |
|
#14
|
|||
|
|||
|
Re: NavX Micro Case
Yes please do!
|
|
#15
|
|||
|
|||
|
Re: NavX Micro Case
I made some updates to the cover. Better view through the holes to the board, lengthen the standoff to hold the board down snug, and better iD's of what each hole is.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|