Go to Post You hang for show; kick for dough. - Travis Hoffman [more]
Home
Go Back   Chief Delphi > FIRST > General Forum
Reload this Page Gear hole diameter?
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 07-01-2017, 19:06
Ichlieberoboter's Avatar
Ichlieberoboter Ichlieberoboter is offline
Awards and Programming
AKA: Maria Valentini
FRC #2499 (Industrial Revolution)
Team Role: Programmer
  
Join Date: Jan 2015
Rookie Year: 2012
Location: Minnesota
Posts: 250
Ichlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud ofIchlieberoboter has much to be proud of
Gear hole diameter?
Looking through the manual, we saw the gear dimensions but we couldn't seem to find anything that had the dimensions of the hole in the gear? Obviously the easiest solution would be to just measure it, but our coach has our kop until Monday and we are trying to work on design ideas today! We may have just missed it, sorry if we did, but thank you for any help!
__________________
Team 2499-Industrial Revolution
2015 Lake Superior Regional Judges Award

Head Programmer Chairman's Award Presenter Awards Submitter Electrical Team Website Designer Strategy Team

Reply With Quote
  #2   Spotlight this post!  
Unread 07-01-2017, 19:16
engunneer's Avatar
engunneer engunneer is offline
Alumni turned Mentor
AKA: Branden Gunn
FRC #4761
Team Role: Mentor
  
Join Date: Jan 2007
Rookie Year: 1996
Location: Reading, MA
Posts: 877
engunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond repute
Re: Gear hole diameter?
the peg on the airship where the pilot installs the gear has a diameter of 7/8". the gear is a very loose fit, so i would estimate between 15/16" and 1" diameter.
__________________
Student FRC23 (1996-1999), Mentor FRC246 (2000), Mentor FRC1318 (2007-2009), Mentor FRC93 (2011), Mentor FRC2151 (2012), Mentor FRC23 (2013), Mentor FRC4761 (2014-2017)
1998 - National Chairman's Award and Woodie Flowers Award (FRC23, Mike Bastoni ) | 2007 - PNW SF (488, 1595) | 2008 - Oregon RCA - Seattle #2 Seed, SF (488, 1696) | 2009 - Oregon #1 Seed, Winners (1983, 2635) - Seattle SF (945, 2865) - Galileo #2 Seed, SF (973, 25) | 2012 Midwest F (111, 71) | 2014 RIDE Winners (78, 125), Inspector - NEU #24, QF (3479, 3958) - NECMP #35 | 2015 Reading #11, SF (1058, 190), Inspector - RIDE #17, QF(4055, 5494), Inspector - NECMP #57 | 2016 Reading #4, SF (133, 4474), DCA, Inspector - Ride #22, SF (1735, 2067), Creativity, Inspector - NECMP #48, RCA - Archimedes
Reply With Quote
  #3   Spotlight this post!  
Unread 07-01-2017, 19:18
nickbrickmaster's Avatar
nickbrickmaster nickbrickmaster is offline
Not Allowed Near Power Tools
AKA: Nick Schatz
FRC #3184 (Blaze Robotics)
Team Role: Leadership
  
Join Date: Jan 2015
Rookie Year: 2014
Location: Eagan MN
Posts: 165
nickbrickmaster is an unknown quantity at this point
Re: Gear hole diameter?
1"

Source: http://files.andymark.com/LayoutPrin...0T+gear+v1.PDF
__________________
I have approximate knowledge of many things.

FRC 3184: 2014-, FTC 10648: 2015-
Reply With Quote
  #4   Spotlight this post!  
Unread 07-01-2017, 20:16
MasterEric's Avatar
MasterEric MasterEric is offline
Bacon. 'nuff said.
AKA: Eric Myllyoja (E2)
FRC #2137 (Oxford Robocats)
Team Role: Programmer
  
Join Date: Dec 2012
Rookie Year: 2013
Location: Oxford High School
Posts: 64
MasterEric is an unknown quantity at this point
Re: Gear hole diameter?
Keep in mind, the peg is 1-3/8 inches wide. In order to put the gear on the peg you must put it in one of the large side holes between the "spokes".
Reply With Quote
  #5   Spotlight this post!  
Unread 07-01-2017, 21:07
engunneer's Avatar
engunneer engunneer is offline
Alumni turned Mentor
AKA: Branden Gunn
FRC #4761
Team Role: Mentor
  
Join Date: Jan 2007
Rookie Year: 1996
Location: Reading, MA
Posts: 877
engunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond reputeengunneer has a reputation beyond repute
Re: Gear hole diameter?
Quote:
Originally Posted by MasterEric View Post
Keep in mind, the peg is 1-3/8 inches wide. In order to put the gear on the peg you must put it in one of the large side holes between the "spokes".
the peg I meant in this case is on the railing as part of a GEAR TRAIN. The LIFT also has a peg, which is as you described.
__________________
Student FRC23 (1996-1999), Mentor FRC246 (2000), Mentor FRC1318 (2007-2009), Mentor FRC93 (2011), Mentor FRC2151 (2012), Mentor FRC23 (2013), Mentor FRC4761 (2014-2017)
1998 - National Chairman's Award and Woodie Flowers Award (FRC23, Mike Bastoni ) | 2007 - PNW SF (488, 1595) | 2008 - Oregon RCA - Seattle #2 Seed, SF (488, 1696) | 2009 - Oregon #1 Seed, Winners (1983, 2635) - Seattle SF (945, 2865) - Galileo #2 Seed, SF (973, 25) | 2012 Midwest F (111, 71) | 2014 RIDE Winners (78, 125), Inspector - NEU #24, QF (3479, 3958) - NECMP #35 | 2015 Reading #11, SF (1058, 190), Inspector - RIDE #17, QF(4055, 5494), Inspector - NECMP #57 | 2016 Reading #4, SF (133, 4474), DCA, Inspector - Ride #22, SF (1735, 2067), Creativity, Inspector - NECMP #48, RCA - Archimedes
Reply With Quote
Reply

« Previous Thread | Portal | Next Thread »

Thread Tools
Display Modes Rate This Thread
Hybrid Mode Hybrid Mode
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:20.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.

Contact Us - Chief Delphi - Rules - Archive - Top

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi