Go to Post - Only think of Gracious Professionalism as a standard to work toward personally. - Never use it as a gauge to point out someone else’s shortcomings. - Rich Kressly [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 14-01-2017, 12:29
Repasky379's Avatar
Repasky379 Repasky379 is offline
Registered User
AKA: Matt
FRC #0379
Team Role: Programmer
 
Join Date: Jun 2013
Rookie Year: 2012
Location: Ohio
Posts: 5
Repasky379 is an unknown quantity at this point
Problem Connecting with OM5P-AC Radio

After imaging the roboRIO and updating the firmware on the radio, we tried to upload code through labVIEW. However, we weren't able to connect to the robot to upload code.
The laptop we are using connects to the robot, as we can connect to the network. When connecting through the dashboard, the communications indicator on the dashboard is green, but code is red.
The wifi light on the radio is solid yellow, the comm indicator on the roboRIO is solid red.
We configured the radio using the newest configuration tool, we tried methods suggested in other threads such as putting a name in the optional robot name section of the tool and turning off IPv6 connectivity. Pinging the RIO doesn't give us any results either.
If anyone has any suggestions, please let us know.
Reply With Quote
  #2   Spotlight this post!  
Unread 14-01-2017, 20:45
AustinShalit's Avatar
AustinShalit AustinShalit is offline
Registered User
AKA: אוסטין
no team (WPILib Suite Developer)
 
Join Date: Dec 2013
Rookie Year: 2008
Location: Los Angeles/Worcester/Israel
Posts: 144
AustinShalit is a glorious beacon of lightAustinShalit is a glorious beacon of lightAustinShalit is a glorious beacon of lightAustinShalit is a glorious beacon of lightAustinShalit is a glorious beacon of lightAustinShalit is a glorious beacon of light
Re: Problem Connecting with OM5P-AC Radio

Have you followed R63?
__________________
Reply With Quote
  #3   Spotlight this post!  
Unread 14-01-2017, 22:29
Mark McLeod's Avatar
Mark McLeod Mark McLeod is offline
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,862
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: Problem Connecting with OM5P-AC Radio

From your description it sounds like your radio is fine and the roboRIO is fine.

Check your LabVIEW project explorer window to insure that your team number is entered correctly (see attached example).

You can test by connecting your PC directly to the roboRIO via a USB cable, however you must change the project Target from "roboRIO-####-FRC.local" to "172.22.11.2" in order to Run as startup over the USB connection.
Attached Thumbnails
Click image for larger version

Name:	LV-TeamNumber.jpg
Views:	20
Size:	36.6 KB
ID:	21540  
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Reply With Quote
  #4   Spotlight this post!  
Unread 15-01-2017, 10:13
Repasky379's Avatar
Repasky379 Repasky379 is offline
Registered User
AKA: Matt
FRC #0379
Team Role: Programmer
 
Join Date: Jun 2013
Rookie Year: 2012
Location: Ohio
Posts: 5
Repasky379 is an unknown quantity at this point
Re: Problem Connecting with OM5P-AC Radio

Quote:
Originally Posted by Mark McLeod View Post
From your description it sounds like your radio is fine and the roboRIO is fine.

Check your LabVIEW project explorer window to insure that your team number is entered correctly (see attached example).

You can test by connecting your PC directly to the roboRIO via a USB cable, however you must change the project Target from "roboRIO-####-FRC.local" to "172.22.11.2" in order to Run as startup over the USB connection.
This was likely the problem, as we were able to upload code when we switched laptops. Thanks!
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 15:33.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi