Radio Config. Utility, Timeout waiting for radio.

[Coconut Head]

Hello,

When I try to update the firmware on my radio I always get this message.

Bridge firmware load failed: Timeout waiting for radio. Make sure you have launched the .exe not the .jar. Try using a switch. Please reset the bridge and try again.

Anyone know what I can do?

[Mark McLeod]

Here are a few things to try.

Wait to power the radio until after you'd pressed the Firmware button, or cycled the power after it tells you to.

Disable all other network interfaces:
- Network and Sharing Center -> Change adapter settings
- Right-click and choose Disable

Disable the Firewall or McAfee and any anti-virus programs.

[Coconut Head]

Originally Posted by Mark McLeod

Here are a few things to try.

Wait to power the radio until after you'd pressed the Firmware button, or cycled the power after it tells you to.

Disable all other network interfaces:
- Network and Sharing Center -> Change adapter settings
- Right-click and choose Disable

Disable the Firewall or McAfee and any anti-virus programs.

Hello Mark,

When I press the Firmware button when the radio has no power I get an error called

Bridge firmware load failed: Internal error
Bridge firmware sequence failed: Internal error

I have been cycling the power after I press the firmware button, the radio would be on when I pressed the button.
I have disabled all other adapters and my antivirus program.