|
|
|
 Multiple event winners are what drive me and my friends to be better and achieve more. - Akash Rastogi [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Multiple event winners are what drive me and my friends to be better and achieve more. - Akash Rastogi [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
28-01-2003, 23:02
|
||||
|
||||
|
The biggest problem with buying omni wheels is that there are pretty expensive, so therefore making them is the best bet. There are so many ways of making them that I won't go into, but a really cool model of how to do it, is Wildstang's design from last year. I don't know if you remeber it or not but we were thinking about modeling our omni's after but decided against it in the end. And lastely if you actually decide to buy your omni's try www.acroname.com
|
|
#4
31-01-2003, 09:04
|
|||||
|
|||||
|
We decided against reusing our omni wheel design this year as the design was too narrow for the wire mesh. We last used them in 2001 on our rampbot, referred to by Woody as "aircraft carrier". Maybe next year.
BTW Last edited by Al Skierkiewicz : 31-01-2003 at 09:08. |
|
#5
31-01-2003, 19:00
|
||||
|
||||
|
omni caster design
Check this out...a different approach to "omni" wheels:
http://robots.mit.edu/publications/PDF/166.pdf |
|
#6
04-02-2003, 16:07
|
|||
|
|||
|
good source for omni wheels & parts
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Omni wheels in 2004 kit? | Salik Syed | Technical Discussion | 2 | 16-03-2003 22:47 |
| How fast is fast to get on the hill? | ianbbat | General Forum | 76 | 09-03-2003 21:05 |
| We need Omni Wheels!! | archiver | 2001 | 0 | 24-06-2002 01:02 |
| Lots of Wheels and F = u x N | archiver | 2001 | 17 | 23-06-2002 23:37 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
Hybrid Mode
