|
|
|
 I saw 2274, a rookie team that had won the regional, gathered around their mentor. He was holding their trophy and saying, "This is what it is all about. Teamwork and cooperation. You guys did great." - Po-ser [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
SMC Double Solenoid Valve Assembly
The SMC (5) port (2) position, double solenoid valve assembly consists of the following components:
- Main valve body with double solenoid pilot operators - Valve sub-base - Gasket - (2) screws - (2) electrical connectors (The SMC portion of the kit includes (2) valve assemblies) To assemble the valve: 1) Insert screws in through holes of main valve body 2) Align gasket onto bottom of valve 3) Align and install valve body onto valve sub-base tightening screws evenly 4) Attach solenoid electrical connectors Fittings and tubing will be connected in the following manner: P-port = Supply pressure A-port = Cylinder B-port = Cylinder EA-port = A port exhaust EB-port = B port exhaust Air supply pressure must be a minimum of 15psi in order to properly shift the internal spool of the valve. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SMC Double Action Valve. | Josh Hambright | Pneumatics | 2 | 14-02-2003 10:24 |
| multiple cyclinders from one double solenoid | Ed Crammond | Pneumatics | 1 | 07-02-2003 18:49 |
| SMC valve leak? | inwoodraider | Pneumatics | 1 | 02-02-2003 01:04 |
| Will trade for double solenoid valve | archiver | 2001 | 2 | 24-06-2002 00:33 |
| Single Solenoid Valve SMC | Chubtoad | Technical Discussion | 3 | 20-01-2002 15:16 |
Hybrid Mode
