|
|
|
 the point is that FIRST is successful, in so many different ways - Pamela [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| the point is that FIRST is successful, in so many different ways - Pamela [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
5VDC from Gyro - 64 or 75 deg/s?
I've seen spec sheets that specify the maximum signal from the gyro (5VDC, or 254 in PBASIC) correlates with either 64 deg/s and 75 deg/s...which is it?
Thanks. |
|
#2
09-03-2003, 15:13
|
||||
|
||||
|
Last year's gyro chip was rated at 64deg/sec, but this year's is rated at 75deg/sec.
|
|
#3
09-03-2003, 20:17
|
|||
|
|||
|
It's rated at 75 deg/sec, but the range of voltage is 0.25 V off each rail (1/4 to 4-3/4 V). It's 27 mV / deg/sec, but remember the resolution on the RC is 20 mV at best, about 0.75 deg/sec / count.
 |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Usage of the gyro | jon virgi | General Forum | 37 | 09-06-2003 11:57 |
| gyro code | odin892 | Programming | 2 | 08-04-2003 14:50 |
| gyro | odin892 | Programming | 0 | 08-04-2003 09:59 |
| Help with the gyro chip | Team852 | Electrical | 1 | 10-01-2003 22:31 |
| Have YOU used the gyro chip? | FotoPlasma | Technical Discussion | 10 | 31-01-2002 13:26 |
Hybrid Mode
