Connecting FP Motors to stuff

Matt Krass · #1 27-07-2003, 19:27

Hey guys I need some motor advice. I'm using the Fisher-Price motor and transmission for a project and I'm wondering how to conenct things to the tranny, I don't see an axle on the Inventor model, am I missing something obvious? Help is appreciated.

Bduggan04 · #2 28-07-2003, 12:55

You need to use the Fisher Price Web driver as an adapter to the slotted white tubing that sticks out of the tranny. Not the easiest transmission to work around, that's for sure.

ChrisH · #3 28-07-2003, 14:51

Quote:

Originally posted by Bduggan04
You need to use the Fisher Price Web driver as an adapter to the slotted white tubing that sticks out of the tranny. Not the easiest transmission to work around, that's for sure.

The kit also had a steel axel for the FPs. I think the diameter was 7/16 or something odd like that. It fits through the hole in the tranny and through the Web Driver.

Matt Krass · #4 28-07-2003, 16:30

Thanks guys, anybody know where I can get an Inventor model of the Web driver?

rbayer · #5 28-07-2003, 17:05

Quote:

Originally posted by Matt Krass
Thanks guys, anybody know where I can get an Inventor model of the Web driver?

Check out www.firstcadlibrary.com.

It's in the Mechanical section and called "FP Jeep Driver"

Matt Krass · #6 28-07-2003, 17:40

Found it thanks guys.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PWM and burning out motors	patrickrd	Technical Discussion	7	19-06-2003 15:30
Looking for practice motors & extra tape drive parts?	archiver	2000	1	23-06-2002 22:54
Suppose you want seat motors...	archiver	2000	0	23-06-2002 22:50
"Motors and Drive train edition" of Fresh From the Forum	Ken Leung	CD Forum Support	6	29-01-2002 12:32
Drill Motors	TF8	Motors	19	12-12-2001 13:13