pic: 1083 Teaser

CD47-Bot · #1 14-02-2004, 10:07

Ryan Albright · #2 14-02-2004, 10:08

George that is cool.. One question.. When you are going to hang are you gonna be touching that side bar and if my memory serves me correctly you are not allowed to be leaning or touching anything

kjohnson · #3 14-02-2004, 10:34

Your bar doesn't look the right diameter either...Ours seems bigger than that. But looking at the picture again, I can't really tell, it just looks smaller. I would check on that.

George1902 · #4 14-02-2004, 12:36

Quote:

Originally Posted by nukemknight

Your bar doesn't look the right diameter either...Ours seems bigger than that. But looking at the picture again, I can't really tell, it just looks smaller. I would check on that.

As far as I know, we ordered everything right from the BOM, but I will double check it. Thanks!

Ryan, refer to the definition of HANGING and SUPPORTED. They are quite clear and unambiguous. ;-]

Ryan Albright · #5 14-02-2004, 13:08

Quote:

Originally Posted by George1083

As far as I know, we ordered everything right from the BOM, but I will double check it. Thanks!

Ryan, refer to the definition of HANGING and SUPPORTED. They are quite clear and unambiguous. ;-]

mmm after the comment i decided to go look at the rules....hmm maybe i should read the rule before i post. The bar looks like are's and we followed the BOM

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: team 254 teaser	CD47-Bot	Robot Showcase	10	02-03-2004 10:06
pic: Team 1083 Teaser	CD47-Bot	Robot Showcase	2	13-02-2004 01:28
pic: Robot Parts Fighters! (Or 810 Teaser #1...)	CD47-Bot	Robot Showcase	11	12-02-2004 16:44
pic: 1024 Teaser	CD47-Bot	Extra Discussion	7	08-02-2004 10:10
pic: MVRT 115 El Toro 7 teaser	CD47-Bot	Robot Showcase	12	02-02-2004 05:43