Making .Hex files

dddriveman · #1 11-03-2004, 09:17

We have our autonomous code the way we want it now we just need to make it into a .hex file. We are using MP Lab IDE and we cannot figure out how to turn it into a .hex file. I believe we got the code form kevin.org i am not sure but it is the navigate code and the tracker code. we modified it slighty and now we want to load it into the robot but we cannot make the .c file into a .hex file. Also do we need to load the default and other codes into it in order to use it in compeetition. Please help

CrashZero · #2 11-03-2004, 09:20

Go to the Project menu and click on "build all"

Tom Bottiglieri · #3 11-03-2004, 09:22

also, make sure you are loading the project into mplab and not just the .c source file

CrashZero · #4 11-03-2004, 09:28

Also when you download it make sure that it is the one that you want to download. The one that you make will have the name of the workspace as a .HEX as opposed to a .MCW

Astronouth7303 · #5 11-03-2004, 13:47

If hitting F10, Build all, etc. causes an error or doesn't build it right, make sure the mcc18 compiler is installed right.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wiring Diagram for making a Joystick	Nick Fury	Control System	0	10-02-2004 23:10
IMPORTANT FIRST EMAIL/DXF files posted on FIRST website	miketwalker	FIRST E-Mail Blast Archive	0	19-01-2004 19:53
tga files for animation	LizJJury	General Forum	1	15-02-2003 16:36
VKOP igs files	JeffO	Inventor	0	15-01-2003 20:37
Multiple files usage	punarhero	Programming	2	12-01-2003 11:45