4wd from Kit

xxmaddjxx · #1 11-01-2005, 14:49

What do we need and how do we make a four wheel drive system out of what we have in the kit?

What additional parts do we need?

Cory · #2 11-01-2005, 14:54

You need two sprockets on the output shaft.

Paul H · #3 11-01-2005, 15:45

Or you could slave the wheels together.

Ben Piecuch · #4 11-01-2005, 15:53

The KOP already comes with the 4 wheels and 4 wheel hubs, while the transmission output shafts are designed to accommodate two sprockets. So, all you need are the two sprockets for the output shaft, and the two sprockets that attach to the wheel hubs. The 4 extra sprockets can be purchased from Innovation First, under the "Robot Parts" section.

Bengineer
Team 228

Paul Copioli · #5 11-01-2005, 16:17

Please look on the ifirobotics.com forums website at the following thread:http://www.ifirobotics.com/forum/viewforum.php?f=20

I monitor your questions here and at ifirobotics.com and post them on the FAQ site on the ifirobotics website. I am doing this at FIRST's request.

-Paul

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robovation Robot kit	cmmarkes	Robotics Education and Curriculum	4	24-01-2005 17:24
Coding CDs in the kit -- What'd you get?	elyscape	Programming	1	08-01-2005 14:31
need standard kit gearbox	Korbin	Kit & Additional Hardware	0	15-11-2004 21:18
Warning: Error in beacon assembly directions included in the kit!	Dave Flowerday	Electrical	11	27-01-2004 16:36
Q&A Discuss: How many Van door motor(s) come with the kit?	CD47-Bot	Extra Discussion	1	08-01-2003 11:07