|
|
|
 Code doesn't break. It reacts exactly the same time every time. When something new happens that never happened before, it's because the mechanicals, electricals or drivers gave the code some new stimulus that wasn't tested before. - GaryVoshol [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
Mating gear for the window motor?
Does anyone know what size gears is on the motor and where I could get a mating gear to put on a window motor? Any suggestions to how I can bolt a sprocket to the gear?
|
|
#2
24-01-2005, 10:13
|
|||
|
|||
|
Re: Mating gear for the window motor?
we had a lil fun with that last year... we took the sprocket assembly out of the motor, put a bolt through it, and then attached that to a drill press.. once that was going full speed, we took a grinder to it and ground down the sprocket small enough to fit the other sprocket onto it.. a lil bit of shade tree engineering, but it worked
 .. i wouldnt reccomend it though...j |
|
#3
24-01-2005, 10:53
|
|||
|
|||
|
Re: Mating gear for the window motor?
Last year we removed the sprocket from the window motor, the guys in the machine truck at the Buckeye regional welded a thick washer to the teeth on the sprocket and we bolted a flat chain sprocket to the washer. drilled holes and tapped the washer and used 8 32 button head screws. Then put it all back together. Good luck.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Window motor mating gear | Gui Cavalcanti | Technical Discussion | 5 | 24-01-2003 01:13 |
| DP of Window Motor Gear? | archiver | 2001 | 9 | 23-06-2002 23:24 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
| Black motor mating gear | mnkysp6353 | Motors | 5 | 20-01-2002 11:09 |
| Drivetrain Help | Jordan | Technical Discussion | 16 | 02-12-2001 12:14 |
Hybrid Mode
