pic: 1382 Brazil - Gyro Tests

tribotec_ca88 · #1 05-02-2005, 20:11

probizzle · #2 05-02-2005, 20:15

Quote:

We're using an innovative test method where the robot is placed on a chair with wheels (after the bench had been removed and replaced with a wooden board) to simulate movements without turning any motors on...all of this to simply test the gyro.

Not as innovative as our testing method.

We had someone from electronics sit there and rotate it for us.

"No, the other way. That way, darn it. Yes, that way."

Created a much livelier atmosphere that what your swivel chair (which is pretty cool too) seems to have created.

Zanella BR · #3 06-02-2005, 13:00

It's hard to see, but we have a small laser pen (it's in my hand, on the robot) that indicates which angle the robot is.

It's working very well.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Updated: Example Gyro Interface Code	Kevin Watson	Programming	2	28-03-2005 04:36
Example gyro code released.	Kevin Watson	Programming	60	17-03-2005 18:32
pic: 1382 Brazil - Gear box	tribotec_ca88	Robot Showcase	19	01-02-2005 21:37
pic: Team 1382 BrAZiL at work!!!	Mandi_\|<o>\|	Extra Discussion	2	26-01-2005 22:41
pic: 1- Team 1382 (Brazil) Sneak Peak @ our robot!!!	CD47-Bot	Robot Showcase	3	07-02-2004 17:45