Need help with code.

[hawk_11]

Hello, I'm a beginner programmer on Team 1302. I need help with a simple code.

The story runs like this. Today I was asked to make a very simple code to just make the motors rotate. I then realized that my mentors/other programmers never taught me how to start a program. This is really bad because I've been almost the only programmer here all build season. Long story short, I plugged the code in, but it is saying I'm missing a source code. Guess what, I was never told about source codes and seeing as it has the word 'source' in it, you'd think someone would remember to teach me -.- Can anyone help?

[Mike]

What do you mean you "plugged the code in"? Do you have the latest MPLab IDE and compiler on your computer?

[hawk_11]

Originally Posted by MikeWasHere05

What do you mean you "plugged the code in"? Do you have the latest MPLab IDE and compiler on your computer?

yes

[Anton]

you should download the default code from ifirobotics.com/rc.shtml
fo to file>>open workspase>> the only *mcp file in the code folder and then just modify default_routie(found in user_routines.c) as you need.
to access motors give a value between 0 and 255 to a pwm port where the motor is plugged in.
pwm01=255; for example

[hawk_11]

Originally Posted by Anton

you should download the default code from ifirobotics.com/rc.shtml
fo to file>>open workspase>> the only *mcp file in the code folder and then just modify default_routie(found in user_routines.c) as you need.
to access motors give a value between 0 and 255 to a pwm port where the motor is plugged in.
pwm01=255; for example

thanks, actually I found out what I was doing wrong fifteen seconds ago so this post is now effectively dead.

Thanks for the help everyone!

More specific FIRST related coding help
http://www.chiefdelphi.com/forums/sh...ad.php?t=30976
http://www.chiefdelphi.com/forums/sh...ad.php?t=31817
http://www.ifirobotics.com/rc.shtml#Programming

If you have no experience with C try this white paper
http://www.chiefdelphi.com/forums/pa...le&paperid=396


There are plenty of tutorials and help all around this forum if you just search and look around. Hope these help

[hawk_11]

Originally Posted by D.J. Fluck

More specific FIRST related coding help
http://www.chiefdelphi.com/forums/sh...ad.php?t=30976
http://www.chiefdelphi.com/forums/sh...ad.php?t=31817
http://www.ifirobotics.com/rc.shtml#Programming

If you have no experience with C try this white paper
http://www.chiefdelphi.com/forums/pa...le&paperid=396


There are plenty of tutorials and help all around this forum if you just search and look around. Hope these help

thanks