|
|
|
 Quote from my mentor: "Keep things as complex as necessary, and not a bit more." - Mike [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Quote from my mentor: "Keep things as complex as necessary, and not a bit more." - Mike [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
40a connectors
has anyone found nice 40a quick release connectors that are legal?? i would like to use at least 4 sets, or a large bus for our board to make it easier to remove
any help would be great |
|
#2
07-02-2005, 23:33
|
|||
|
|||
|
Re: 40a connectors
Check out the Anderson single-pole power connectors, also available from McMaster Carr. They look pretty nice.
|
|
#3
08-02-2005, 07:57
|
|||||
|
|||||
|
Re: 40a connectors
There are a variety of Anderson Power Products contacts available. Vendors are Terminal Supply, McMaster, Powerwerx or West Mountain Radio (http://www.westmountainradio.com/), my favorite. The 35 amp connectors are good for most purposes. They will fit a #10 wire by slightly opening the contact and are small enough for other wiring. The body is made to fit into other contacts so that multiple contact connectors can be formed with no tools other than the crimper. I don't know if McMaster carries the crimper but the others do and it is well worth the expense.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PWM Style .100 pitch Male Connectors | BrianBSL | Electrical | 2 | 05-10-2004 19:43 |
| Bad 40A Breaker | Richard Wallace | Electrical | 3 | 18-02-2003 21:42 |
| Slip connectors (custom electrical connectors) | Damian Manda | Electrical | 2 | 08-02-2003 17:53 |
| RJ-45 connectors, DB25 connectors and the like: legal or no? | Andrew Wyatt | Technical Discussion | 6 | 04-01-2002 22:53 |
| 45 or 75 amp anderson power products connectors to drill motors? | Andrew Wyatt | Motors | 2 | 20-12-2001 08:00 |
Hybrid Mode
