PIC Programming

John Gutmann · #1 29-08-2005, 12:57

does anybody know of anywhere i can get a pogramming circuit for the 18F4620? or for any other 18F series?

Sparks333 · #2 29-08-2005, 14:51

I happen to really like the Microchip ICD 2, which is a great debugger as well. Sure, it's $150, but I think its worth every penny.

Sparks

sciguy125 · #3 30-08-2005, 09:35

As far as I know, the JDM will program all serial programmable 12F, 16F and 18F PICS as well as some serial eeproms. Here's a schematic for the "fully loaded" version:
http://www.josepino.com/3/

You can get all the parts for less than $10.

Edit: I forgot to mention that the JDM will also work for in circuit programming (you don't have to pull the chip out of your circuit). However, it eats 2 of your I/Os.

John Gutmann · #4 30-08-2005, 11:51

2 I/O's are ok since i have a chip with 36

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Linux and new microcontollers.	djcapelis	Programming	48	29-01-2005 00:26
'Fix It Window' and Programming....	JMac	Programming	19	25-01-2005 18:57
Book on C programming - suggestions?	wun	Programming	18	14-01-2005 00:12
Programming and Electronics — Getting Started	Sidney San Martín	Technical Discussion	7	12-01-2005 15:25
Programming Code	themaxim	Programming	10	07-01-2005 13:07