Can't find CMUCam2 demo.llb

[railerobotics]

We cannot find CMUCam2 demo.llb like mentioned in the camara workbook. Do we download it or is it somewhere else? Please help us.

[Alan Anderson]

I think http://www.chiefdelphi.com/forums/fo...play.php?f=149 might help you find what you're looking for.

[railerobotics]

No, we have already looked there. Where do we download the CMUCam2 demo.llb application used in Lab View 8.0 like mentioned in the camara workbook? We have searched and searched on the web but have failed miserably. Did this application come in the kit?

[pbrules15]

WHERE IS IT?????????????????????????

[fowlerm]

Originally Posted by Ronny

WHERE IS IT?????????????????????????

You can get it here. The password to extract the contents of the zip file is "LVFRC2006!" case sensitive and without the quotes.

[Danny Diaz]

Originally Posted by fowlerm

You can get it here. The password to extract the contents of the zip file is "LVFRC2006!" case sensitive and without the quotes.

Be careful about posting exact links to this file, the filename and/or location can change, it is best to look here:

http://www.chiefdelphi.com/forums/f...splay.php?f=149

The sticky post will always point to the correct link. Also note that now the files are not password-protected.

-Danny

[railerobotics]

Thanks

[railerobotics]

Now that we have the application and have it on the computer in lab view, we cannot get it to run. I click the little arrow and a little error window pops up and says something like that we need to check our serial port or see if the camara has power. The serial port is fine, we spent hours checking it. And the camara has power. WHATS WRONG??? Please help us.

[Danny Diaz]

Originally Posted by railerobotics

WHATS WRONG???

Could be a number of things.

1. Make sure the backup battery is FULLY CHARGED.
2. Make sure you've installed the latest version of the NI-VISA software in your computer.
3. Make sure you've configured your serial port to the correct speed via Measurement and Automation Explorer.
4. Make sure the serial port specified in the application is the correct serial port the serial cable is plugged into.
5. Make sure the backup battery is FULLY CHARGED.
6. Make sure you've read the documentation provided with the Camera App.
7. Make sure your serial cable is good.
8. Make sure the camera is correctly set up and everything is plugged in snugly (especially the lens daughterboard).

And above all, make sure your backup battery is fully charged.

-Danny

[railerobotics]

thanks, it now works. The file we were missing mi-visa was in the documention of the frc camara.

[railerobotics]

You said, "If you use easyC for FRC the camera values for the target are preloaded in the software. If you upload Tutorial #7 to your robot it should folow the target." Where is "Tutorial #7"?

[Chris_Elston]

Originally Posted by Danny Diaz

Could be a number of things.

1. Make sure the backup battery is FULLY CHARGED.
5. Make sure the backup battery is FULLY CHARGED.

And above all, make sure your backup battery is fully charged.

-Danny

I am sorry, but this hits HOME for us...I dunno how many times the camera stopped working only to find out the backup battery was dead or not charged. Only a week into this, and this is an inside joke for our team....

Backup battery charged? CHECK!

[Kingofl337]

If you use easyC for FRC the camera values for the target are preloaded in the software. If you upload Tutorial #7 to your robot it should folow the target.